Capricorn Bowden Tubing (10cm)

1,85 € *
Inhalt: 0.1 Laufende(r) Meter (18,50 € * / 1 Laufende(r) Meter)

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 1-7 Werktage

  • Capricorn100mm
Achtung: Verkauf in 10cm Stücken, wenn 1m benötigt wird Artikel 10x in Warenkorb legen.... mehr
Produktinformationen "Capricorn Bowden Tubing (10cm)"

Achtung: Verkauf in 10cm Stücken, wenn 1m benötigt wird Artikel 10x in Warenkorb legen.

Your extruder system has a finite amount of pushing force. You want as much as possible of that pushing force to be used to generate pressure in your HotEnd, as it’s what causes the molten filament to actually extrude from the print-head (crucial to 3D printing!).The friction of filament sliding its way from the filament drive to the HotEnd saps away some of this force, leaving less force to create useful pressure. When we use a bowden system the filament has to travel on a longer and more convoluted path, and so we get higher losses to friction. While standard PTFE is slippery enough to mitigate this effect, it does not eliminate it.

Another error source in extrusion systems is the compression/buckling of the filament. As we apply pressure to the filament in order to extrude it will bend a little (but a little is all it takes) between the extruder drive wheel and the HotEnd melt zone. Because of this spring-like compression we can advance the filament by 1mm at the drive wheels, but 1mm’s worth of filament will not immediately exit the nozzle in perfect synchronicity. In a bowden system this filament-spring is “softer” due to its much increased-length. The subsequent deformation under force results in extruder motor speed changes taking longer to be reflected at the nozzle, and the errors being greater in magnitude. 

Capricorn XS bowden tubing helps with both of these issues. It is made of pure PTFE that has been treated with a special additive to reduce friction. It is also made to highly precise standards, with an extremely tight internal diameter to improve filament constraint between the extruder and the HotEnd.

Key Features

  • Inner diameter of just 1.9mm
  • Highly consistent - perfectly round
  • Treated with a unique friction-reducing additive
  • Capricorn™ XS branded quality
  • Perfect for softer and more flexible filaments
  • For use with 1.75mm filament only
  • Buy from YouPrintin3D in lengths of 100mm - add more to your basket to receive longer lengths!
Weiterführende Links zu "Capricorn Bowden Tubing (10cm)"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Capricorn Bowden Tubing (10cm)"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Wenn Sie sich Anmelden könnten Sie einen Gutschein für ihre Bewertung erhalten
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Versandkostenfrei!
V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,15 € *
v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm
Inhalt 1 Stück
6,52 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
9,00 € *
BLTouch-smart V3.1 BLTouch-smart V3.1
Inhalt 1 Stück
ab 39,00 € *
Versandkostenfrei!
Titan Extruder Titan Extruder
Inhalt 1 Stück
ab 48,94 € *
Versandkostenfrei!
Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm
Inhalt 1 Stück
ab 32,00 € *
Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt
Inhalt 1 Stück
4,99 € *
High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V
Inhalt 1 Stück
ab 20,00 € *
Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6
Inhalt 1 Stück
23,00 € *
Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w
Inhalt 1 Stück
11,07 € *
Everfil™PLA Ø 1.75mm 1kg Everfil™PLA Ø 1.75mm 1kg
Inhalt 1 Kilogramm
ab 19,00 € *
Gates Powergrip® *2GT* Belt 6mm x 100mm Gates Powergrip® *2GT* Belt 6mm x 100mm
Inhalt 0.1 Laufende(r) Meter (8,50 € * / 1 Laufende(r) Meter)
ab 0,85 € *
1m Bowden (1.75mm Filament) 1m Bowden (1.75mm Filament)
Inhalt 1 Stück
7,18 € *
Silicone Socks for Volcano - Pack of 3 Silicone Socks for Volcano - Pack of 3
Inhalt 3 Stück (3,36 € * / 1 Stück)
10,07 € *
Silicone Socks for v6 - Pack of 3 - Pro Socks Silicone Socks for v6 - Pack of 3 - Pro Socks
Inhalt 3 Stück (1,72 € * / 1 Stück)
5,15 € *
v6 Heat Break (1.75mm) v6 Heat Break (1.75mm)
Inhalt 1 Stück
10,03 € *
Versandkostenfrei!
V6 Hemera XS Direct Kit V6 Hemera XS Direct Kit
Inhalt 1 Stück
178,00 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 14,06 € *
30x30x10mm 24v DC Fan 30x30x10mm 24v DC Fan
Inhalt 1 Stück
7,46 € *
Versandkostenfrei!
Hemera XS Bowden V2 Hemera XS Bowden V2
Inhalt 1 Stück
135,00 € *
Versandkostenfrei!
Nozzle X - Volcano Nozzle X - Volcano
Inhalt 1 Stück
39,00 € *
Versandkostenfrei!
Volcano HotEnd Volcano HotEnd
Inhalt 1 Stück
ab 73,00 € *
Radiallüfter 40x40x20 24V Radiallüfter 40x40x20 24V
Inhalt 1 Stück
3,99 € *
Radiallüfter 50x15 5015S 12Volt Radiallüfter 50x15 5015S 12Volt
Inhalt 1 Stück
4,99 € *
v6 Extra Nozzle - Hardened Steel - für Carbonfilament v6 Extra Nozzle - Hardened Steel - für...
Inhalt 1 Stück
ab 21,00 € *
BMG Extruder New Version BMG Extruder New Version
Inhalt 1 Stück
ab 88,00 € *
High Temperature Heater Cartridges High Temperature Heater Cartridges
Inhalt 1 Stück
ab 68,00 € *
Hotend Dice V2 24V Hotend Dice V2 24V
Inhalt 1 Stück
ab 35,00 € *
Block & Sock - V6 Upgrade kit Block & Sock - V6 Upgrade kit
Inhalt 1 Stück
27,00 € *
Zuletzt angesehen