Plated Copper-Alloy Heater Block 500° Heizkopf

Dieser Artikel steht derzeit nicht zur Verfügung!
28,00 € *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 5 Tage

  • Alloy-Heater-Block
These blocks are engineered for ultimate high temperature performance. Made from a special high... mehr
Produktinformationen "Plated Copper-Alloy Heater Block 500° Heizkopf"

These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.

 

In addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300C where a silicone sock can't be used.

 

Combine with our plated copper nozzles for the ultimate extrusion pairing.

 

Why Copper?

 

Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.

 

This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that aluminium heater blocks can't handle.

 

Product Specs

 

• Copper-alloy heater block with nickel plating

• Resistant to temperatures beyond 500°C

• Laser-engraved with E3D logo

• Very shiny

• Compatible with sensor cartridges and silicone socks.

Weiterführende Links zu "Plated Copper-Alloy Heater Block 500° Heizkopf"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Plated Copper-Alloy Heater Block 500° Heizkopf"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 12,49 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 12,49 € *
Silicone Socks for v6 - Pack of 3 - Pro Socks Silicone Socks for v6 - Pack of 3 - Pro Socks Silicone Socks for v6 - Pack of 3 - Pro Socks
Inhalt 3 Stück (1,67 € * / 1 Stück)
5,00 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
6,29 € *
Titan Extruder Titan Extruder Titan Extruder
Inhalt 1 Stück
ab 66,00 € *
v6 Heat Break (1.75mm) v6 Heat Break (1.75mm)
Inhalt 1 Stück
16,00 € *
Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w
Inhalt 1 Stück
7,00 € *
Heater Cartridge - 12v - 40w Heater Cartridge - 12v - 40w Heater Cartridge - 12v - 40w
Inhalt 1 Stück
7,00 € *
Water cooled Heatsink Water cooled Heatsink Water cooled Heatsink
Inhalt 1 Stück
33,50 € *
Silicone Socks for Volcano - Pack of 3 Silicone Socks for Volcano - Pack of 3 Silicone Socks for Volcano - Pack of 3
Inhalt 3 Stück (2,33 € * / 1 Stück)
7,00 € *
V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit
Inhalt 1 Stück
47,00 € *
v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm
Inhalt 1 Stück
7,39 € *
3D Lac – Sprühkleber 3D Lac – Sprühkleber 3D Lac – Sprühkleber
Inhalt 0.4 Liter (24,98 € * / 1 Liter)
9,99 € *
High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V
Inhalt 1 Stück
ab 18,30 € *
Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse
Inhalt 1 Stück
35,00 € *
V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,00 € *
Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6
Inhalt 1 Stück
46,00 € *
Titan Thumb Wheel Titan Thumb Wheel
Inhalt 1 Stück
4,00 € *
Radiallüfter 40x40x20 24V Radiallüfter 40x40x20 24V Radiallüfter 40x40x20 24V
Inhalt 1 Stück
3,99 € *
Block & Sock - V6 Upgrade kit Block & Sock - V6 Upgrade kit Block & Sock - V6 Upgrade kit
Inhalt 1 Stück
21,00 € *
Radiallüfter 40x40x20 Radiallüfter 40x40x20 Radiallüfter 40x40x20
Inhalt 1 Stück
3,99 € *
PLA 3 mm, 500g viele Farben nach Wahl PLA 3 mm, 500g viele Farben nach Wahl PLA 3 mm, 500g viele Farben nach Wahl
Inhalt 0.5 Kilogramm (17,78 € * / 1 Kilogramm)
8,89 € *
PT100 Amplifier Board PT100 Amplifier Board PT100 Amplifier Board
Inhalt 1 Stück
23,00 € *
Hobb-Goblin - 5mm ID Drive Gear Hobb-Goblin - 5mm ID Drive Gear Hobb-Goblin - 5mm ID Drive Gear
Inhalt 1 Stück
12,00 € *
v6 Extra Nozzle - Hardened Steel - für Carbonfilament v6 Extra Nozzle - Hardened Steel - für Carbonfilament v6 Extra Nozzle - Hardened Steel - für...
Inhalt 1 Stück
ab 23,99 € *
E3D 7mm Nozzle Spanner E3D 7mm Nozzle Spanner E3D 7mm Nozzle Spanner
Inhalt 1 Stück
1,00 € *
Fibreglass Sleeving for Insulating Thermistors (100mm) Fibreglass Sleeving for Insulating Thermistors...
Inhalt 1 Stück (0,00 € * / Stück)
0,50 € *
Ferrules for joining wires 2x Ferrules for joining wires 2x
Inhalt 2 Stück (0,00 € * / Stück)
0,50 € *
v6 Extra Nozzle - 3mm x 0.40mm v6 Extra Nozzle - 3mm x 0.40mm v6 Extra Nozzle - 3mm x 0.40mm
Inhalt 1 Stück
7,39 € *
Airbrushdüsenadapter mit 3 Düsen für e3d v6 Hotend, 1.75mm Airbrushdüsenadapter mit 3 Düsen für e3d v6 Hotend, 1.75mm Airbrushdüsenadapter mit 3 Düsen für e3d v6...
Inhalt 1 Stück
18,00 € * 24,99 € *
Versandkostenfrei!
Filament 3D Bamboo PRI-MAT 3D 800g Ø1,75 Filament 3D Bamboo PRI-MAT 3D 800g Ø1,75 Filament 3D Bamboo PRI-MAT 3D 800g Ø1,75
Inhalt 0.8 Kilogramm (42,50 € * / 1 Kilogramm)
34,00 € *
Versandkostenfrei!
TPU medium clear 1.75/2.85mm TPU medium clear 1.75/2.85mm
Inhalt 1 Stück
30,00 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 12,49 € *
Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse
Inhalt 1 Stück
35,00 € *
Water cooled Heatsink Water cooled Heatsink Water cooled Heatsink
Inhalt 1 Stück
33,50 € *
Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6
Inhalt 1 Stück
46,00 € *
sparklab. ICE - wassergekühltes Hotend sparklab. ICE - wassergekühltes Hotend sparklab. ICE - wassergekühltes Hotend
Inhalt 1 Stück
ab 109,00 € *
Hotend Dice V2 24V Hotend Dice V2 24V Hotend Dice V2 24V
Inhalt 1 Stück
ab 35,00 € *
Titan Aqua Titan Aqua Titan Aqua
Inhalt 1 Stück
ab 163,00 € *
Titan Aero HotEnd and Extruder Titan Aero HotEnd and Extruder Titan Aero HotEnd and Extruder
Inhalt 1 Stück
ab 123,00 € *
Titan Extruder Titan Extruder Titan Extruder
Inhalt 1 Stück
ab 66,00 € *
Water Cooling Kit Water Cooling Kit Water Cooling Kit
Inhalt 1 Stück
115,00 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
6,29 € *
High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V
Inhalt 1 Stück
ab 18,30 € *
The V6 GOLD Edition HotEnd 12V/24V The V6 GOLD Edition HotEnd 12V/24V The V6 GOLD Edition HotEnd 12V/24V
Inhalt 1 Stück
100,00 € *
V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,00 € *
Block & Sock - V6 Upgrade kit Block & Sock - V6 Upgrade kit Block & Sock - V6 Upgrade kit
Inhalt 1 Stück
21,00 € *
Replicape Replicape Replicape
Inhalt 1 Stück
105,00 € *
Silicone Socks for v6 - Pack of 3 - Pro Socks Silicone Socks for v6 - Pack of 3 - Pro Socks Silicone Socks for v6 - Pack of 3 - Pro Socks
Inhalt 3 Stück (1,67 € * / 1 Stück)
5,00 € *
DyzEnd-X Hotend 1.75mm DyzEnd-X Hotend 1.75mm DyzEnd-X Hotend 1.75mm
Inhalt 1 Stück
ab 95,95 € *
Thermistor Replacement Kit Thermistor Replacement Kit Thermistor Replacement Kit
Inhalt 1 Stück
6,00 € *
Versandkostenfrei!
Optokopplerplatine Optokopplerplatine Optokopplerplatine
Inhalt 1 Stück
11,50 € *
Versandkostenfrei!
RADDS 1.5 Premiumset Display-Due-RADDS-4xRAPS128 Treiber RADDS 1.5 Premiumset...
Inhalt 1 Stück
179,00 € *
NEU
Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt
Inhalt 1 Stück
4,99 € *
Airbrushdüsenadapter mit 3 Düsen für e3d v6 Hotend, 1.75mm Airbrushdüsenadapter mit 3 Düsen für e3d v6 Hotend, 1.75mm Airbrushdüsenadapter mit 3 Düsen für e3d v6...
Inhalt 1 Stück
18,00 € * 24,99 € *
Nozzle Pro Pack 1.75mm Nozzle Pro Pack 1.75mm Nozzle Pro Pack 1.75mm
Inhalt 1 Stück
79,00 € *
Filament Sentinel 1.75mm Filament Filament Sentinel 1.75mm Filament
Inhalt 1 Stück
42,00 € *
Crimpstecker Sortiment 650 Teile Crimpstecker Sortiment 650 Teile
Inhalt 1 Stück
11,99 € *
PET-G YouPrintin3D viele Farben nach Wahl PET-G YouPrintin3D viele Farben nach Wahl
Inhalt 1 Kilogramm
26,00 € *
DyzeXtruder GT ColdEnd Extruder 1.75mm DyzeXtruder GT ColdEnd Extruder 1.75mm DyzeXtruder GT ColdEnd Extruder 1.75mm
Inhalt 1 Stück
190,00 € *
DyzEnd Liquid Cooling Block DyzEnd Liquid Cooling Block DyzEnd Liquid Cooling Block
Inhalt 1 Stück
26,00 € *
V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit
Inhalt 1 Stück
47,00 € *
Volcano Extra Nozzle - 1.75mm x 0.4mm Volcano Extra Nozzle - 1.75mm x 0.4mm Volcano Extra Nozzle - 1.75mm x 0.4mm
Inhalt 1 Stück
7,19 € *
Optokopplerplatine zum selber löten Optokopplerplatine zum selber löten Optokopplerplatine zum selber löten
Inhalt 1 Stück
7,50 € *
24V Extruder + v6 HotEnd Full Kit - 1.75mm Universal  (with Bowden add-on) 24V Extruder + v6 HotEnd Full Kit - 1.75mm Universal  (with Bowden add-on) 24V Extruder + v6 HotEnd Full Kit - 1.75mm...
Inhalt 1 Stück
ab 114,95 € *
Zuletzt angesehen