Block & Sock - V6 Upgrade kit

Dieser Artikel steht derzeit nicht zur Verfügung!
21,00 € *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 14 Tage

  • Block-Sock
Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor... mehr
Produktinformationen "Block & Sock - V6 Upgrade kit"

Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge Block. Read all about them in the Blog Post.

  • V6 cartridge-style heater block
  • Silicone Sock V6 (x3)
  • The new cartridge thermistor
  • Thermistor cable
  • Fixings

 

  • These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
  • Made of a heat-resistant, non-stick silicone material that will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
  • These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
  • The covers simply push onto the front of the hotend with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm
  • Socks don't last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With less sticky materials like ABS and gentler use you can get almost infinite life. Your mileage may vary.

 

Weiterführende Links zu "Block & Sock - V6 Upgrade kit"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Block & Sock - V6 Upgrade kit"
29.01.2017

Sehr schönes Umbaukit.

Habe mich dafür entschieden da ich die Idee mit dem neuen Extruder-Thermometer für sehr gut fand. Die Silikon hülle erfüllt ihren zweck und als Nebeneffekt ist auch die Temperatur stabiler. Von mir eine klare Kaufempfehlung!

24.10.2016

Präzise gefertigt. China kommt hier nicht ran.

Gerade im Bereich Hotend und Filamenttrieb setzte ich auf Qualität aus Europa. Mit E3D Produkten kann man im FDM Bereich eigentlich nichts falsch machen - wie immer funktional entwickelt und präzise gefertigt. Einzig die Silikonsocke bedarf einer Revision. Standzeit bei 240°C ca. 50-60h.

Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm
Inhalt 1 Stück
7,39 € *
Silicone Socks for v6 - Pack of 3 - Pro Socks Silicone Socks for v6 - Pack of 3 - Pro Socks Silicone Socks for v6 - Pack of 3 - Pro Socks
Inhalt 3 Stück (1,67 € * / 1 Stück)
5,00 € *
v6 Heat Break (1.75mm) v6 Heat Break (1.75mm)
Inhalt 1 Stück
16,00 € *
Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w
Inhalt 1 Stück
7,00 € *
Heater Cartridge - 12v - 40w Heater Cartridge - 12v - 40w Heater Cartridge - 12v - 40w
Inhalt 1 Stück
7,00 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
6,29 € *
Titan Extruder Titan Extruder Titan Extruder
Inhalt 1 Stück
ab 66,00 € *
PET-G YouPrintin3D viele Farben nach Wahl PET-G YouPrintin3D viele Farben nach Wahl
Inhalt 1 Kilogramm
26,00 € *
PLA 1.75 mm Farbe nach Wahl PLA 1.75 mm Farbe nach Wahl
Inhalt 0.75 Kilogramm (26,67 € * / 1 Kilogramm)
20,00 € *
v6 Extra Nozzle - Hardened Steel - für Carbonfilament v6 Extra Nozzle - Hardened Steel - für Carbonfilament v6 Extra Nozzle - Hardened Steel - für...
Inhalt 1 Stück
ab 24,00 € *
Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse
Inhalt 1 Stück
35,00 € *
V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,00 € *
Radiallüfter 40x40x20 Radiallüfter 40x40x20 Radiallüfter 40x40x20
Inhalt 1 Stück
3,99 € *
30x30x10mm 24v DC Fan 30x30x10mm 24v DC Fan 30x30x10mm 24v DC Fan
Inhalt 1 Stück
7,00 € *
v6 Extra Nozzle - 1.75mm x 0.25mm v6 Extra Nozzle - 1.75mm x 0.25mm v6 Extra Nozzle - 1.75mm x 0.25mm
Inhalt 1 Stück
12,00 € *
Lüfter 30x10 12VDC 0,58W 9,34m3/h VAPO Lüfter 30x10 12VDC 0,58W 9,34m3/h VAPO
Inhalt 1 Stück
10,00 € *
Heater Cartridge - 12v - 30w Heater Cartridge - 12v - 30w Heater Cartridge - 12v - 30w
Inhalt 1 Stück
7,00 € *
RADDS Hall-E Endstop (3,3-5Volt) RADDS Hall-E Endstop (3,3-5Volt) RADDS Hall-E Endstop (3,3-5Volt)
Inhalt 1 Stück
7,95 € *
E3D 7mm Nozzle Spanner E3D 7mm Nozzle Spanner E3D 7mm Nozzle Spanner
Inhalt 1 Stück
1,00 € *
RADDS Board V1.6 12V/24V RADDS Board V1.6 12V/24V
Inhalt 1 Stück
57,90 € *
v6 Extra Nozzle - 1.75mm x 0.60mm v6 Extra Nozzle - 1.75mm x 0.60mm v6 Extra Nozzle - 1.75mm x 0.60mm
Inhalt 1 Stück
7,39 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 12,49 € *
v6 Extra Nozzle - 3mm x 0.40mm v6 Extra Nozzle - 3mm x 0.40mm v6 Extra Nozzle - 3mm x 0.40mm
Inhalt 1 Stück
7,39 € *
High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V
Inhalt 1 Stück
ab 18,30 € *
Silicone Socks for Volcano - Pack of 3 Silicone Socks for Volcano - Pack of 3 Silicone Socks for Volcano - Pack of 3
Inhalt 3 Stück (2,33 € * / 1 Stück)
7,00 € *
Thermistor Replacement Kit Thermistor Replacement Kit Thermistor Replacement Kit
Inhalt 1 Stück
6,00 € *
Hobb-Goblin - 5mm ID Drive Gear Hobb-Goblin - 5mm ID Drive Gear Hobb-Goblin - 5mm ID Drive Gear
Inhalt 1 Stück
12,00 € *
30x30x10mm 12v DC Fan 30x30x10mm 12v DC Fan 30x30x10mm 12v DC Fan
Inhalt 1 Stück
7,00 € *
Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm)
Inhalt 0.1 Laufende(r) Meter (13,00 € * / 1 Laufende(r) Meter)
1,30 € *
EZ-Stik Hot 3D Printer Build Surface EZ-Stik Hot 3D Printer Build Surface
Inhalt 1 Stück
ab 19,00 € *
Titan Aero Upgrade Kit Titan Aero Upgrade Kit Titan Aero Upgrade Kit
Inhalt 1 Stück
ab 43,00 € *
Crimpstecker Sortiment 650 Teile Crimpstecker Sortiment 650 Teile
Inhalt 1 Stück
11,99 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
6,29 € *
v6 Heater Block & Fixings v6 Heater Block & Fixings v6 Heater Block & Fixings
Inhalt 1 Stück
ab 17,79 € *
Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w
Inhalt 1 Stück
7,00 € *
Versandkostenfrei!
Plated Copper Volcano Kit Plated Copper Volcano Kit Plated Copper Volcano Kit
Inhalt 1 Stück
85,00 € *
Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt
Inhalt 1 Stück
4,99 € *
Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse
Inhalt 1 Stück
35,00 € *
Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6
Inhalt 1 Stück
46,00 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 12,49 € *
Volcano - Starter Pack - 1.75mm Volcano - Starter Pack - 1.75mm Volcano - Starter Pack - 1.75mm
Inhalt 1 Stück
39,00 € *
Volcano - Eruption Pack - 1.75mm Volcano - Eruption Pack - 1.75mm Volcano - Eruption Pack - 1.75mm
Inhalt 1 Stück
47,00 € *
Heater Cartridge - 24v - 30w Heater Cartridge - 24v - 30w Heater Cartridge - 24v - 30w
Inhalt 1 Stück
7,00 € *
FL-Spezial FL-Spezial
Inhalt 1 Stück
435,00 € *
Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm)
Inhalt 0.1 Laufende(r) Meter (13,00 € * / 1 Laufende(r) Meter)
1,30 € *
Plated Copper Volcano Block Plated Copper Volcano Block Plated Copper Volcano Block
Inhalt 1 Stück
32,00 € *
Versandkostenfrei!
Dual Extrusion+ Dual Extrusion+ Dual Extrusion+
Inhalt 1 Stück
ab 85,00 € *
Plated Copper Nozzles - Volcano Plated Copper Nozzles - Volcano Plated Copper Nozzles - Volcano
Inhalt 1 Stück
18,00 € *
Hardened Steel Nozzles - Volcano Hardened Steel Nozzles - Volcano Hardened Steel Nozzles - Volcano
Inhalt 1 Stück
22,00 € *
Heat Block replacement Heat Block replacement
Inhalt 1 Stück
ab 10,00 € *
High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V
Inhalt 1 Stück
ab 18,30 € *
Nozzle Pro Pack 1.75mm Nozzle Pro Pack 1.75mm Nozzle Pro Pack 1.75mm
Inhalt 1 Stück
79,00 € *
The V6 GOLD Edition HotEnd 12V/24V The V6 GOLD Edition HotEnd 12V/24V The V6 GOLD Edition HotEnd 12V/24V
Inhalt 1 Stück
100,00 € *
V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,00 € *
Versandkostenfrei!
Legends Pack Old Style Legends Pack Old Style Legends Pack Old Style
Inhalt 1 Stück
141,00 € * 176,00 € *
Titan Aero Upgrade Kit Titan Aero Upgrade Kit Titan Aero Upgrade Kit
Inhalt 1 Stück
ab 43,00 € *
Thermistor Replacement Kit Thermistor Replacement Kit Thermistor Replacement Kit
Inhalt 1 Stück
6,00 € *
V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit
Inhalt 1 Stück
47,00 € *
Z-PETG Filament Grey 800g 1,75mm Z-PETG Filament Grey 800g 1,75mm
Inhalt 1 Stück
44,00 € *
Volcano 24v- Eruption Pack - 3mm Volcano 24v- Eruption Pack - 3mm Volcano 24v- Eruption Pack - 3mm
Inhalt 1 Stück
47,00 € *
Zuletzt angesehen