Ab 80€ Versandkostenfrei innerhalb Deutschlands

v6 Extra Nozzle - Hardened Steel - für Carbonfilament

27,99 € *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Düsengröße/Durchmesser:

Wähle dein Düse aus.

  • SW10462
Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.... mehr
Produktinformationen "v6 Extra Nozzle - Hardened Steel - für Carbonfilament"

Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.

 

If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials. You can read more about it in our Blog Post.

 

We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.

 

Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.

 

Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!

 

 

Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.

 

If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials. You can read more about it in our Blog Post.

 

We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.

 

Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.

 

Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!



 

All nozzles in the series are individually identifiable with markings on the flats of the hex head making them even more convenient to work with. See the table below for more information on what these markings mean:

# Marks

Nozzle Size

0

0.25mm

1

0.30mm

2

0.35mm

3

0.40mm

6*

0.50mm

4

0.60mm

5

0.80mm

* Sorry!

 


 

Compatibility

  • v6 Nozzles are backwards compatible, so can be used to upgrade your v5 HotEnd.

- See more at: http://e3d-online.com/V6-nozzle-hardened-steel-3mmx0.4mm#sthash.ACo0emUs.dpuf

Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.

 

If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials. You can read more about it in our Blog Post.

 

We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.

 

Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.

 

Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!



 

All nozzles in the series are individually identifiable with markings on the flats of the hex head making them even more convenient to work with. See the table below for more information on what these markings mean:

# Marks

Nozzle Size

0

0.25mm

1

0.30mm

2

0.35mm

3

0.40mm

6*

0.50mm

4

0.60mm

5

0.80mm

* Sorry!

 


 

Compatibility

  • v6 Nozzles are backwards compatible, so can be used to upgrade your v5 HotEnd.

- See more at: http://e3d-online.com/V6-nozzle-hardened-steel-3mmx0.4mm#sthash.ACo0emUs.dpuf
Weiterführende Links zu "v6 Extra Nozzle - Hardened Steel - für Carbonfilament"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "v6 Extra Nozzle - Hardened Steel - für Carbonfilament"
25.02.2016

Eins A - Preis etwas hoch

Super Düsen. Im Gegensatz zu den normalen Düsen wirklich sehr Abnutzungsresistent. Farbe bei mir relativ Dunkel gewesen, aber Drucker fällt es weniger auf.
Druckbild 1A, bisher knapp 1000m Filament durchgelaufen ohne das was passiert.

28€ ist halt schon ne Ansage.

15.02.2016

Problemlos

Die Druckdüse funktioniert problemlos sowohl mit PLA als auch mit Carbon-Filament. Habe bisher ca. 700 g PLA und 300 g Carbonfil damit verdruckt. Bisher ist tatsächlich keinerlei Abnutzung zu erkennen. Den Düsenwechsel kann man zudem gleich nutzen, um das Hotend gründlich zu reinigen und von Filamentresten zu befreien. Über die Langzeithaltbarkeit der Düse kann ich allerdings noch nichts sagen.

Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zahlenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Nozzle Fun Pack! 1,75mm Nozzle Fun Pack! 1,75mm
Inhalt 1 Stück
41,99 € *
Silicone Socks for v6 - Pack of 3 Silicone Socks for v6 - Pack of 3
Inhalt 3 Stück (1,65 € * / 1 Stück)
4,95 € *
Versandkostenfrei!
MF-PETG 25 Farben zur Auswahl! MF-PETG 25 Farben zur Auswahl!
Inhalt 1 Kilogramm
39,00 € *
ABS 3mm mm 500 g Farbe nach Wahl ABS 3mm mm 500 g Farbe nach Wahl
Inhalt 0.5 Kilogramm (14,98 € * / 1 Kilogramm)
ab 7,49 € *
PET-G YouPrintin3D viele Farben nach Wahl PET-G YouPrintin3D viele Farben nach Wahl
Inhalt 1 Kilogramm
26,00 € *
Nozzle Fun Pack! 3mm Nozzle Fun Pack! 3mm
Inhalt 1 Stück
41,99 € *
Versandkostenfrei!
RADDS 1.5 Premiumset Display-Due-RADDS-4xRAPS128 Treiber RADDS 1.5 Premiumset...
Inhalt 1 Stück
199,00 € *
v6 Extra Nozzle - 1.75mm x 0.25mm v6 Extra Nozzle - 1.75mm x 0.25mm
Inhalt 1 Stück
11,49 € *
Simplify 3D V3.1 Software Simplify 3D V3.1 Software
Inhalt 1 Stück
156,90 € *
Block & Sock - V6 Upgrade kit Block & Sock - V6 Upgrade kit
Inhalt 1 Stück
20,95 € *
Radiallüfter 40x40x20 Radiallüfter 40x40x20
Inhalt 1 Stück
3,99 € *
Titan Extruder Titan Extruder
Inhalt 1 Stück
ab 65,99 € *
E3D 7mm Nozzle Spanner E3D 7mm Nozzle Spanner
Inhalt 1 Stück
0,99 € *
Versandkostenfrei!
v6 HotEnd Full Kit 24v - 3.00mm Direct v6 HotEnd Full Kit 24v - 3.00mm Direct
Inhalt 1 Stück
69,95 € *
v6 Heat Break (1.75mm) v6 Heat Break (1.75mm)
Inhalt 1 Stück
15,49 € *
GT2 Pulley 20Zähne GT2 Pulley 20Zähne
Inhalt 1 Stück
5,29 € *
v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm
Inhalt 1 Stück
7,39 € *
Versandkostenfrei!
Versandkostenfrei!
Versandkostenfrei!
Extrudr Fichte (Holz) Extrudr Fichte (Holz)
Inhalt 1 Kilogramm
54,00 € *
Thermistor Replacement Kit Thermistor Replacement Kit
Inhalt 1 Stück
5,99 € *
Hobb-Goblin - 8mm ID Drive Gear Hobb-Goblin - 8mm ID Drive Gear
Inhalt 1 Stück
11,99 € *
PET Filament, 3 mm, 750 g Blau-Transparent PET Filament, 3 mm, 750 g Blau-Transparent
Inhalt 0.75 Kilogramm (33,32 € * / 1 Kilogramm)
24,99 € *
Endstop Microswitches - Omron D2F-01L Endstop Microswitches - Omron D2F-01L
Inhalt 1 Stück
2,49 € *
1m Bowden (3mm Filament) 1m Bowden (3mm Filament)
Inhalt 1 Stück
9,99 € *
Heater Cartridge - 24v - 25w Heater Cartridge - 24v - 25w
Inhalt 1 Stück
6,90 € *
v6 Extra Nozzle - 3mm x 0.25mm v6 Extra Nozzle - 3mm x 0.25mm
Inhalt 1 Stück
11,49 € *
Versandkostenfrei!
v6 HotEnd Full Kit 24v - 1.75mm Universal (Direct) v6 HotEnd Full Kit 24v - 1.75mm Universal (Direct)
Inhalt 1 Stück (0,00 € * / Stück)
69,95 € *
Versandkostenfrei!
v6 HotEnd Full Kit 24v - 1.75mm Universal (with Bowden add-on) v6 HotEnd Full Kit 24v - 1.75mm Universal (with...
Inhalt 1 Stück (0,00 € * / Stück)
79,95 € *
Fibreglass Sleeving for Insulating Thermistors (100mm) Fibreglass Sleeving for Insulating Thermistors...
Inhalt 1 Stück (0,00 € * / Stück)
0,45 € *
v6 Heater Block & Fixings v6 Heater Block & Fixings
Inhalt 1 Stück
17,79 € *
Markenlager LMU8 Linearlager 4-reihig Markenlager LMU8 Linearlager 4-reihig
Inhalt 1 Stück
ab 4,69 € *
v6 Extra Nozzle - 3mm x 0.60mm v6 Extra Nozzle - 3mm x 0.60mm
Inhalt 1 Stück
7,39 € *
v6 Extra Nozzle - 3mm x 0.40mm v6 Extra Nozzle - 3mm x 0.40mm
Inhalt 1 Stück
7,39 € *
v6 Extra Nozzle - 1.75mm x 0.60mm v6 Extra Nozzle - 1.75mm x 0.60mm
Inhalt 1 Stück
7,39 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
12,49 € *
Silicone Socks for v6 - Pack of 3 Silicone Socks for v6 - Pack of 3
Inhalt 3 Stück (1,65 € * / 1 Stück)
4,95 € *
Nozzle Fun Pack! 1,75mm Nozzle Fun Pack! 1,75mm
Inhalt 1 Stück
41,99 € *
V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit
Inhalt 1 Stück
46,79 € *
PushFit – 4mm Tube Through PushFit – 4mm Tube Through
Inhalt 1 Stück
4,29 € *
Block & Sock - V6 Upgrade kit Block & Sock - V6 Upgrade kit
Inhalt 1 Stück
20,95 € *
DyzEnd-X Hotend 1.75mm DyzEnd-X Hotend 1.75mm
Inhalt 1 Stück
ab 95,95 € *
Titan Extruder Titan Extruder
Inhalt 1 Stück
ab 65,99 € *
v6 HotEnd Full Kit - Assembled v6 HotEnd Full Kit - Assembled
Inhalt 1 Stück
ab 84,99 € *
RADDS Board V1.5 12V/24V RADDS Board V1.5 12V/24V
Inhalt 1 Stück
57,90 € *
v6 Heat Break (1.75mm) v6 Heat Break (1.75mm)
Inhalt 1 Stück
15,49 € *
CTC Alubett CTC Alubett
Inhalt 1 Stück
17,25 € *
PET-G YouPrintin3D viele Farben nach Wahl PET-G YouPrintin3D viele Farben nach Wahl
Inhalt 1 Kilogramm
26,00 € *
Radiallüfter 40x40x20 24V Radiallüfter 40x40x20 24V
Inhalt 1 Stück
3,99 € *
DyzeXtruder GT ColdEnd Extruder 1.75mm DyzeXtruder GT ColdEnd Extruder 1.75mm
Inhalt 1 Stück
189,95 € *
Rechteckige Steckverbinder - Kontakte Rechteckige Steckverbinder - Kontakte
Inhalt 1 Stück
0,20 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
6,29 € *
Versandkostenfrei!
Hexagon V3 Beta Version Hexagon V3 Beta Version
Inhalt 1 Stück
1.900,00 € *
DyzEnd Liquid Cooling Block DyzEnd Liquid Cooling Block
Inhalt 1 Stück
25,69 € *
Versandkostenfrei!
MF-PETG 25 Farben zur Auswahl! MF-PETG 25 Farben zur Auswahl!
Inhalt 1 Kilogramm
39,00 € *
BendLay 1,75 mm 500 g BendLay 1,75 mm 500 g
Inhalt 0.5 Kilogramm (22,98 € * / 1 Kilogramm)
11,49 € *
Markenlinearlager LHBB10 Sparkcube XL Markenlinearlager LHBB10 Sparkcube XL
Inhalt 1 Stück
10,49 € *
Sparkcube XL Wellen g6 Sparkcube XL Wellen g6
Inhalt 1 Paket(e)
74,99 € *
Kraken Kraken
Inhalt 1 Stück
219,99 € *
1m Bowden (1.75mm Filament) 1m Bowden (1.75mm Filament)
Inhalt 1 Stück
9,99 € *
E3D 7mm Nozzle Spanner E3D 7mm Nozzle Spanner
Inhalt 1 Stück
0,99 € *
v6 Extra Nozzle - 3mm x 0.40mm v6 Extra Nozzle - 3mm x 0.40mm
Inhalt 1 Stück
7,39 € *
v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm
Inhalt 1 Stück
7,39 € *
5 x Stepper-Motor 42BYGHW811 (2.5A) Nema17 5 x Stepper-Motor 42BYGHW811 (2.5A) Nema17
Inhalt 5 Stück (16,59 € * / 1 Stück)
82,95 € *
Zuletzt angesehen