Scaffold is a water-soluble and break-away support filament that actually works. Scaffold offers total design freedom, helping you to create complex geometries and complete functioning mechanisms in a single print (with no worries about overhangs!). Part of E3D’s spoolWorks range, Scaffold works best with our Edge and PLA filaments. For a complete overview of Scaffold and what makes it so special, please see our blog. Features • Can be broken away or dissolved from prints in normal tap water • PVA/PVOH-based but easy to print with low viscosity • Exhaustively tested for exceptional quality • Lower heat degradation and easily purged from nozzles • Designed for perfect compatibility with spoolWorks Edge • Shipped in a re-sealable bag with desiccant for exceptional dryness Advised print settings: • PRINT TEMP: 215°C • BED TEMP: From 20°C to 55C ideally, but will cope with bed temperatures as high as 110°C • Print Speed: ~50mm/s Cautionary notes and advice. • You will need to create specific slicer settings to make the best of Scaffold. • You will need to create specific slicer settings to make the best of Scaffold. • Scaffold needs to be kept dry, use the supplied resealable bag, or even better use this specially designed in-bag spool holder. • Scaffold will degrade if kept for extended periods in a hot nozzle. Do not allow Scaffold to rest in the nozzle at temperature or you risk clogging and damaging the nozzle. • Please read the documentation in order to use Scaffold at it's full potential Note: All 3D printers are unique so adjust settings to taste!

Scaffold is a water-soluble and break-away support filament that actually works. Scaffold offers total design freedom, helping you to create complex geometries and complete functioning mechanisms in a single print (with no worries about overhangs!). Part of E3D’s spoolWorks range, Scaffold works best with our Edge and PLA filaments. For a complete overview of Scaffold and what makes it so special, please see our blog. Features • Can be broken away or dissolved from prints in normal tap water • PVA/PVOH-based but easy to print with low viscosity • Exhaustively tested for exceptional quality • Lower heat degradation and easily purged from nozzles • Designed for perfect compatibility with spoolWorks Edge • Shipped in a re-sealable bag with desiccant for exceptional dryness Advised print settings: • PRINT TEMP: 215°C • BED TEMP: From 20°C to 55C ideally, but will cope with bed temperatures as high as 110°C • Print Speed: ~50mm/s Cautionary notes and advice. • You will need to create specific slicer settings to make the best of Scaffold. • You will need to create specific slicer settings to make the best of Scaffold. • Scaffold needs to be kept dry, use the supplied resealable bag, or even better use this specially designed in-bag spool holder. • Scaffold will degrade if kept for extended periods in a hot nozzle. Do not allow Scaffold to rest in the nozzle at temperature or you risk clogging and damaging the nozzle. • Please read the documentation in order to use Scaffold at it's full potential Note: All 3D printers are unique so adjust settings to taste!