Ersatzkabel SM-XD 150

Ersatzkabel SM-XD 200cm

 220x220mm Buildplatte mit GeckoTek hot Here's what you get with EZ-Stik: Reliable first layer adhesion every time Safe and easy part removal when your job is done Long lasting durability - Designed to last over 100 prints! Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more! Fits every 3D Printer! Easily cuts to size with household scissors Filament: Bed Temperature: Extruder Temperature: ABS 100-110°C 230°C PLA 50-60°C 200°C PETG 70-80°C 230°C Nylon 30-50°C 230°C Flexible 50° C 230°C Buildplatedicke 0.5mm plus Geckotek Hot Beschichtung Material Buildplate: Edelstahl • 1.4016 • 2R • kaltgewalzt blankgeglüht  magnetisch  

 310x310mm Buildplatte mit GeckoTek hot CR10 Größe Here's what you get with EZ-Stik: Reliable first layer adhesion every time Safe and easy part removal when your job is done Long lasting durability - Designed to last over 100 prints! Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more! Fits every 3D Printer! Easily cuts to size with household scissors Filament: Bed Temperature: Extruder Temperature: ABS 100-110°C 230°C PLA 50-60°C 200°C PETG 70-80°C 230°C Nylon 30-50°C 230°C Flexible 50° C 230°C Buildplatedicke 0.5mm plus Geckotek Hot Beschichtung Material Buildplate: Edelstahl • 1.4016 • 2R • kaltgewalzt blankgeglüht  magnetisch  

Passend für cr10 und Konsorten 310x310mm Buildplatte mit GeckoTek hot und Magnetfolie Here's what you get with EZ-Stik: Reliable first layer adhesion every time Safe and easy part removal when your job is done Long lasting durability - Designed to last over 100 prints! Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more! Fits every 3D Printer! Easily cuts to size with household scissors Filament: Bed Temperature: Extruder Temperature: ABS 100-110°C 230°C PLA 50-60°C 200°C PETG 70-80°C 230°C Nylon 30-50°C 230°C Flexible 50° C 230°C Magnetfolie 200 Anisotrop, mehrpolig magnetisiert, Einsatztemperatur 120°C, kurzzeitig bis 200°C Produkteigenschaften Materialstärke: 1,0 mm Remanenz Br: 243–263 mT Koerzitivfeldstärke HcB: 179–203 kA/m Koerzitivfeldstärke HcJ: 211–257 kA/m Energieprodukt (B×H)max.: 11,1–13,5 kJ/m³ Haftkraft: ca. 130 g/cm²* * Die Haftkräfte sind gemessen auf plangeschliffener, 10 mm starker Metallfläche. Material Buildplate: Edelstahl • 1.4016 • 2R • kaltgewalzt blankgeglüht  magnetisch

Passend für e3d Toolchanger 318x218mm Buildplatte mit GeckoTek hot und Magnetfolie Here's what you get with EZ-Stik: Reliable first layer adhesion every time Safe and easy part removal when your job is done Long lasting durability - Designed to last over 100 prints! Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more! Fits every 3D Printer! Easily cuts to size with household scissors Filament: Bed Temperature: Extruder Temperature: ABS 100-110°C 230°C PLA 50-60°C 200°C PETG 70-80°C 230°C Nylon 30-50°C 230°C Flexible 50° C 230°C Magnetfolie 200 Anisotrop, mehrpolig magnetisiert, Einsatztemperatur 120°C, kurzzeitig bis 200°C Produkteigenschaften Materialstärke: 1,0 mm Remanenz Br: 243–263 mT Koerzitivfeldstärke HcB: 179–203 kA/m Koerzitivfeldstärke HcJ: 211–257 kA/m Energieprodukt (B×H)max.: 11,1–13,5 kJ/m³ Haftkraft: ca. 130 g/cm²* * Die Haftkräfte sind gemessen auf plangeschliffener, 10 mm starker Metallfläche. Material Buildplate: Edelstahl • 1.4016 • 2R • kaltgewalzt blankgeglüht  magnetisch

Passend für Ender-5 Plus 376x370mm Buildplatte mit GeckoTek hot und Magnetfolie Here's what you get with EZ-Stik: Reliable first layer adhesion every time Safe and easy part removal when your job is done Long lasting durability - Designed to last over 100 prints! Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more! Fits every 3D Printer! Easily cuts to size with household scissors Filament: Bed Temperature: Extruder Temperature: ABS 100-110°C 230°C PLA 50-60°C 200°C PETG 70-80°C 230°C Nylon 30-50°C 230°C Flexible 50° C 230°C Magnetfolie 200 Anisotrop, mehrpolig magnetisiert, Einsatztemperatur 120°C, kurzzeitig bis 200°C Produkteigenschaften Materialstärke: 1,0 mm Remanenz Br: 243–263 mT Koerzitivfeldstärke HcB: 179–203 kA/m Koerzitivfeldstärke HcJ: 211–257 kA/m Energieprodukt (B×H)max.: 11,1–13,5 kJ/m³ Haftkraft: ca. 130 g/cm²* * Die Haftkräfte sind gemessen auf plangeschliffener, 10 mm starker Metallfläche. Material Buildplate: Edelstahl • 1.4016 • 2R • kaltgewalzt blankgeglüht  magnetisch

Passend für Ender-3, Ender-3 Pro, Ender-5, CR-20 Pro, Sapphire Pro, Sapphire S 310x310mm Buildplatte mit GeckoTek hot und Magnetfolie Here's what you get with EZ-Stik: Reliable first layer adhesion every time Safe and easy part removal when your job is done Long lasting durability - Designed to last over 100 prints! Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more! Fits every 3D Printer! Easily cuts to size with household scissors Filament: Bed Temperature: Extruder Temperature: ABS 100-110°C 230°C PLA 50-60°C 200°C PETG 70-80°C 230°C Nylon 30-50°C 230°C Flexible 50° C 230°C Magnetfolie 200 Anisotrop, mehrpolig magnetisiert, Einsatztemperatur 120°C, kurzzeitig bis 200°C Produkteigenschaften Materialstärke: 1,0 mm Remanenz Br: 243–263 mT Koerzitivfeldstärke HcB: 179–203 kA/m Koerzitivfeldstärke HcJ: 211–257 kA/m Energieprodukt (B×H)max.: 11,1–13,5 kJ/m³ Haftkraft: ca. 130 g/cm²* * Die Haftkräfte sind gemessen auf plangeschliffener, 10 mm starker Metallfläche. Material Buildplate: Edelstahl • 1.4016 • 2R • kaltgewalzt blankgeglüht  magnetisch

Unbedingt Z neu einstellen!!! Eliminate Warping We know how frustrating it is when the corners lift, or when parts come off. EZ-Stik’s Advanced Coating Technology is designed to reliably prevent peeling. No need for a raft or to ‘squish’ the first layer. Print even the most difficult parts up to 8 inches long with no peeling. Easy Part Removal We designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. We recommend using our non-scratching removal tool for the most difficult parts. Lasts Over 100 Prints Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. Exact life span varies depending on the materials, settings, and 3D printer. Many customers get over 300 prints on a single sheet. Improved Durability Even though EZ-Stik uses a polymer sheet, it is still very durable. It easily resists light scratches by the nozzle. Maintenance and Cleaning There is almost no maintenance needed for GeckoTek Build Surfaces. We recommend that you wipe the surface with isopropyl alcohol wipes every 5-10 prints. Please note: If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate. Drucktemperatur: BED Extruder ABS: 100-110°C ABS 230-250°C PLA: 50-60°C PLA 200-225°C PETG: 70-80°C PETG 230°C Nylon 30-50°C Fexibles 50°c Nylon 230-270°C Flexibles 230-240°C    

Never worry about warping or removing stubborn parts again. Developed specifically to meet the needs of hobbyists and educators, EZ-Stik Cold is the first Reliable, Re-usable Build Surface for printing PLA without the need for a heated bed. Simple cut your EZ-Stik surface to size with standard scissors then use the peel and stick adhesive backing to attach to your build platform.   Eliminate Warping We know how frustrating it is when the corners lift, or when parts come off. EZ-Stik’s Advanced Coating Technology is designed to reliably prevent peeling. No need for a raft or to ‘squish’ the first layer. Print even the most difficult parts up to 8 inches long with no peeling.   Easy Part Removal We designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. We recommend using our non-scratching removal tool for the most difficult parts.   Fits Every 3D Printer EZ-Stik is easily cut to size using regular scissors or a paper cutter, and can also be tiled to cover large printer beds. It is equipped with a pressure-sensitive adhesive backing. The thick, durable polymer film makes it easy to get a smooth, bubble-free application.   Lasts Over 100 Prints Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. Exact life span varies depending on the materials, settings, and 3D printer. Many customers get over 300 prints on a single sheet.   Maintenance and Cleaning There is almost no maintenance needed for GeckoTek Build Surfaces. We recommend that you wipe the surface with isopropyl alcohol wipes every 5-10 prints.   Works great with: MakerBots Printrbots Flashforge Polar3d M3D micro Robo C2   Please note: If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.    

Take your 3D Printing to the next level. The Advanced Coating Technology in EZ-Stik Hot provides maximum adhesion when heated to prevent warping and easy part removal when cooled. Simple cut your EZ-Stik surface to size with standard scissors then use the peel and stick adhesive backing to attach to your build platform. Work with ABS, PLA, PETG, Nylon, Composites and more!   Eliminate Warping We know how frustrating it is when the corners lift, or when parts come off. EZ-Stik’s Advanced Coating Technology is designed to reliably prevent peeling. No need for a raft or to ‘squish’ the first layer. Print even the most difficult parts up to 8 inches long with no peeling.   Easy Part Removal We designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. We recommend using our non-scratching removal tool for the most difficult parts.   Lasts Over 100 Prints Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. Exact life span varies depending on the materials, settings, and 3D printer. Many customers get over 300 prints on a single sheet.   Improved Durability  Even though EZ-Stik uses a polymer sheet, it is still very durable. It easily resists light scratches by the nozzle.   Maintenance and Cleaning  There is almost no maintenance needed for GeckoTek Build Surfaces. We recommend that you wipe the surface with isopropyl alcohol wipes every 5-10 prints.   Please note: If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.    

Our new removable build plates combine the reliability of EZ-Stik with the convenience and flexibility of spring steel to bring you the greatest professional 3D printer build surface on the market. Use your build plate again and again to print every popular filament – PLA, ABS, PETG, Nylon and more. Backordered items will ship in 1-2 weeks. For more information on using your EZ-Stik Hot Build Plate, please see our Wiki.

GeckoTek Build Plates   GeckoTek offers the most advanced and versatile print bed solution for your 3D printing needs. GeckoTek Build Plates have a permanent coating that provides the optimum level of adhesion to prevent warping and provide easy part removal.  Currently there are not standard sized Magnetic Bases that match the Standard Build Plates. Select your choice from our standard sizes and the type of coating for your Build Plate. Custom orders may take up to 2 weeks to ship. Currently we do not offer custom Magnetic Bases.   GeckoTek Build Plates are designed to be used with a Magnetic Base, but can be used over the stock build platform using binder clips or tape (NOT INCLUDED) to secure it down. The best mounting method will vary depending on your 3D Printer.   HT Build Plate GeckoTek Build Plates are the best build surface out there for desktop fused filament 3D Printing. HT Build Plates are designed for use with a heated bed. Print ABS, PLA, PETG and Nylon without worrying about peeling or warping. When the print is finished, gently flex the plate for easy part removal. RT Build Plate RT Build Plates are designed for use without a heated bed. GeckoTek’s Advanced Coating Technology prevents peeling and allows for easy removal for over 100 prints. Works with PLA, flexible filments and some PETGs. Units in millimeters.

Die Magnetfolie 200 aus der GraviFlex®-Serie ist nicht nur ein vielseitiger Problemlöser für Produktion, Werkstatt und Büro, sondern auch ein hochwertiges Halbzeug für die maßgenaue Herstellung beidseitig magnetischer Formteile. Sie punktet mit einer hohen Haftkraft und einer Hitzebeständigkeit von bis zu 200° C.     Magnetfolie 200 Anisotrop, mehrpolig magnetisiert, Einsatztemperatur 120°C, kurzzeitig bis 200°C Produkteigenschaften Materialstärke: 1,0 mm Remanenz Br: 243–263 mT Koerzitivfeldstärke HcB: 179–203 kA/m Koerzitivfeldstärke HcJ: 211–257 kA/m Energieprodukt (B×H)max.: 11,1–13,5 kJ/m³ Haftkraft: ca. 130 g/cm²* * Die Haftkräfte sind gemessen auf plangeschliffener, 10 mm starker Metallfläche. In der Produktfamilie GraviFlex® spielt die Magnetfolie 200 eine besondere Rolle, da sie sich durch drei sehr vorteilhafte Eigenschaften auszeichnet: Sie ist beidseitig permanentmagnetisch, hat eine stattliche Haftkraft von 130 g/m2 und verträgt kurzzeitig sogar Temperaturen von bis zu 200° C. Dauerhaft ist sie für Einsatztemperaturen von 120° C ausgelegt. Dank dieser Merkmale erweist sich die Magnetfolie 200 als universeller Problemlöser für viele Aufgaben in Produktentwicklung, Konstruktion, Produktion, Büro, Labor und Logistik. Beim Lackieren metallischer Flächen dient sie beispielsweise als einfach zu handhabende, hitzebeständige Abdeckung. In der Intralogistik übernimmt sie das Fixieren metallischer Werkstücke auf Förderbändern, im Freilager kennzeichnet die Magnetfolie 200 mit einem QR-Code versehen die bereits mit Stretchfolie geschützten Maschinengehäuse, um nur drei typische Anwendungen aus der industriellen Praxis zu nennen. Selbstklebend und passend Größen für GeckoTek Buildplates. Andere Größen auf Anfrage.

Diese sicheren Kunststoffschaber machen es besonders einfach, jeden 3D-Druck zu entfernen, und sie sind auch im Haus nützlich. 25 doppelseitige Abstreifer in jeder Packung mit insgesamt 50 Nutzflächen. Inklusive Halter.  

GeckoTek offers the most advanced and versatile print bed solution for your 3D printing needs. GeckoTek Build Plates have a permanent coating that provides the optimum level of adhesion to prevent warping and provide easy part removal.  GeckoTek Magnetic Base System provides the best total 3D printing experience by allowing for quick and easy plate removal and attachment.  The precision machined magnetic base integrates seamlessly with your 3D printer to keep the Build Plate flat and secured.  Choose your printer, then select the GeckoTek Products that best fit your needs. Magnetic Bases are available for all Makerbot models. Our RT plates are available for the Replicator 2 and our HT and NY plates are available for the Replicator 1 and Replicator 2X. Additional Info GeckoTek Build Plates are designed to be used with a GeckoTek Magnetic Base, but you can use binder clips or tape (NOT INCLUDED) to secure it down to the stock build surface.  For installation instructions for the Replicator 2 to view or download, Rep2-base-Installation-Guide For installation instructions for the Replicator 2X to view or download, Rep2X-base-Installation-Guide           Here is video of the Replicator 2X installation process For installation instructions for the Replicator 1 to view or download, click here 

GeckoTek offers the most advanced and versatile print bed solution for your 3D printing needs. GeckoTek Build Plates have a permanent coating that provides the optimum level of adhesion to prevent warping and provide easy part removal.  GeckoTek Magnetic Base System provides the best total 3D printing experience by allowing for quick and easy plate removal and attachment.  The precision machined magnetic base integrates seamlessly with your 3D printer to keep the Build Plate flat and secured.  Choose your printer, then select the GeckoTek Products that best fit your needs. Magnetic Bases are available for both Ultimaker models. Our RT plates are available for the Ultimaker 1 and our HT and NY plates are available for the Ultimaker 2. *** The Ultimaker 2 Magnetic Base will not work as is with the Ultimaker 2+ and Extended. It will only work if the press fit bolts are removed from the stock bed heater. Do not attempt unless you know what you are doing.*** GeckoTek Build Plates are designed to be used with a GeckoTek Magnetic Base, but you can use binder clips or tape (NOT INCLUDED) to secure it down to the stock build surface.  The Ultimaker 1 and Ultimaker 2 Magnetic Bases replace the stock build platform and come with all the hardware required for installation. It re-uses some of the original hardware, including springs and thumb nuts. More detailed installation instructions will be available soon.  

Passend für Ultimaker 2/2+/2+Ext./3/3Ext. 255x226mm Borosilikatglas beklebt mit Garviflex Magnetfolie und magnetische Edelstahlplatte beklebt mit GeckoTek-Folie Here's what you get with EZ-Stik: Reliable first layer adhesion every time Safe and easy part removal when your job is done Long lasting durability - Designed to last over 100 prints! Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more! Fits every 3D Printer! Easily cuts to size with household scissors Filament: Bed Temperature: Extruder Temperature: ABS 100-110°C 230°C PLA 50-60°C 200°C PETG 70-80°C 230°C Nylon 30-50°C 230°C Flexible 50° C 230°C Magnetfolie 200 Anisotrop, mehrpolig magnetisiert, Einsatztemperatur 120°C, kurzzeitig bis 200°C Produkteigenschaften Materialstärke: 1,0 mm Remanenz Br: 243–263 mT Koerzitivfeldstärke HcB: 179–203 kA/m Koerzitivfeldstärke HcJ: 211–257 kA/m Energieprodukt (B×H)max.: 11,1–13,5 kJ/m³ Haftkraft: ca. 130 g/cm²* * Die Haftkräfte sind gemessen auf plangeschliffener, 10 mm starker Metallfläche.