EZ-Stik Cold 3D Printer Build Surface

Never worry about warping or removing stubborn parts again. Developed specifically to meet the needs of hobbyists and educators, EZ-Stik Cold is the first Reliable, Re-usable Build Surface for printing PLA without the need for a heated bed. Simple cut your EZ-Stik surface to size with standard scissors then use the peel and stick adhesive backing to attach to your build platform.

Eliminate Warping

We know how frustrating it is when the corners lift, or when parts come off. EZ-Stik’s Advanced Coating Technology is designed to reliably prevent peeling. No need for a raft or to ‘squish’ the first layer. Print even the most difficult parts up to 8 inches long with no peeling.

Easy Part Removal

We designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. We recommend using our non-scratching removal tool for the most difficult parts.

Fits Every 3D Printer

EZ-Stik is easily cut to size using regular scissors or a paper cutter, and can also be tiled to cover large printer beds. It is equipped with a pressure-sensitive adhesive backing. The thick, durable polymer film makes it easy to get a smooth, bubble-free application.

Lasts Over 100 Prints

Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. Exact life span varies depending on the materials, settings, and 3D printer. Many customers get over 300 prints on a single sheet.

Maintenance and Cleaning

There is almost no maintenance needed for GeckoTek Build Surfaces. We recommend that you wipe the surface with isopropyl alcohol wipes every 5-10 prints.

Works great with:
MakerBots
Printrbots
Flashforge
Polar3d
M3D micro
Robo C2

Please note: If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.