Produkte von Bondtech

Bondtech

The company was established in 2014 by Martin Bondéus, who had previously used the 3D printing technology in his work as a product developer. When certain patents regarding the FDM technology expired at the beginning of the 2010s, Martin set out to build a 3D printer based on a pre-designed kit. The result, however, wasn’t satisfying. The performance and quality just weren’t there.

Stubbornly, Martin therefore started building his very own printer from the ground up, not using kit products. This time the result was much better, but unfortunately still not good enough. Grinding, slipping and under extrusion translated into several failed prints.

Scouring the internet for advice, he realized that the problem with bad, unreliable extrusion was universal. Everyone seemed to suffer from the same dilemma. An idea was born.

Today, Bondtech manufactures Bondtech Dual Drive extruders and other innovative 3D printing products to users and retailers across the world. Constantly improving our offer, we believe this is just the beginning.

Filter schließen
 
von bis
 
2 von 3
Für die Filterung wurden keine Ergebnisse gefunden!
Versandkostenfrei!
Creality3D CR-10S PRO Extruder Kit
Creality3D CR-10S PRO Extruder Kit
Updated Version Now this upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit. Increase Your Printer’s Value The BMG Bowden Upgrade...
Inhalt 1 Stück
92,00 € *
Prusa MK3S Mosquito Housing Kit
Prusa MK3S Mosquito Housing Kit
This SLS Spare Parts Kit Refers to: Upgrade Kit for Prusa MK2S / MK3S with Mosquito Upgrade your Prusa MK3S Upgrade Kit to Mosquito This SLS Spare Parts Kit can be used to upgrade the Upgrade Kit for Prusa MK2S / MK3S, to fit Mosquito...
Inhalt 1 Stück
56,00 € *
IFS Extruder for Prusa Mini or Mini+
IFS Extruder for Prusa Mini or Mini+
New Bondtech Internal Filament Sensor Extruder for Prusa Mini. This extruder is an evolution of our previous high-resolution extruder upgrade for the Prusa Mini. Filament Sensor The new filament sensor for Prusa Mini/+ may be mounted...
Inhalt 1 Stück
76,00 € *
Upgrade Kit for Prusa Mini or Mini+
Upgrade Kit for Prusa Mini or Mini+
Upgrade your Prusa Mini extruder to support the Internal Filament Sensor feature. This is a set of plastic parts that allows to upgrade the previous “Upgrade Kit For Prusa Mini” to be IFS (Internal Filament Sensor) compatible. Filament...
Inhalt 1 Stück
34,00 € *
Bondtech Heat-break Kit for Prusa Mini
Bondtech Heat-break Kit for Prusa Mini
To solve Heat-creep This Stainless Steel heat-break made by Bondtech for the Prusa Mini addresses and solves the heat-creep issues revealed during the extensive testing we performed on the Prusa Mini. The adjusted length of the PTFE tube...
Inhalt 1 Stück
16,00 € *
Versandkostenfrei!
Prusa I3 MK2/MK2S extruder upgrade
Prusa I3 MK2/MK2S extruder upgrade
This extruder upgrade is for Prusa MK2 or Prusa MK2S Includes Bondtech Drive Gears This kit is for users that also require the Bondtech Drivegears. Save weight and print faster This kit contains the necessary parts to convert to our...
Inhalt 1 Stück
117,00 € *
Extruder Body Rebuild Set – Upgrade to MK2.5S/3S
Extruder Body Rebuild Set – Upgrade to MK2.5S/3S
This Bondtech Extruder Body Rebuild Set is only for customers who previously bought a Bondtech MK2/MK2S or MK2.5/MK3 Upgrade Kit and have a Prusa i3 upgraded to MK2.5S or MK3S.
Inhalt 1 Stück
29,00 € *
Versandkostenfrei!
Prusa I3 MK2.5-MK3 Extruder upgrade
Prusa I3 MK2.5-MK3 Extruder upgrade
This extruder upgrade are for Prusa MK2.5 or Prusa MK3 where you already have the Bondtech Drivegears. This kit contains the necessary parts to convert to our newly designed extruder with 3:1 gearing ratio for better precision and...
Inhalt 1 Stück
107,00 € *
Versandkostenfrei!
Prusa i3 MK3S+/MK3S / MK2.5S Mosquito
Prusa i3 MK3S+/MK3S / MK2.5S Mosquito
A lightweight high-resolution extruder upgrade for the popular Prusa i3 MK3S and MK2.5S 3D printers with optimized design to use Mosquito and Mosquito Magnum hotends. Upgrade Your Prusa Upgrade your Prusa with a Bondtech Mini Geared...
Inhalt 1 Stück
115,00 € *
Versandkostenfrei!
Prusa I3 MK2.5S / MK3S / MK3S+ Extruder upgrade
Prusa I3 MK2.5S / MK3S / MK3S+ Extruder upgrade
A lightweight high-resolution extruder upgrade for the popular Prusa I3 MK3S 3D printers, featuring an optimized design achieved with the help of the community. This upgrade kit is compatible only with the original All Metal V6 hotend...
Inhalt 1 Stück
112,00 € *
SLS Filament Sensor Parts for Prusa MK3S
SLS Filament Sensor Parts for Prusa MK3S
Parts set to use with: Upgrade Kit for MK2.5S/MK3S Upgrade Kit for MK2.5S/MK3S Mosquito Higher temperature resistance These filament sensor parts set replaces the HT-PLA set of the Bondtech “Prusa MK3S” and “Prusa MK3S with Mosquito”...
Inhalt 1 Stück
20,00 € *
Versandkostenfrei!
Bondtech LGX™ B for Anycubic Mega-X
Bondtech LGX™ B for Anycubic Mega-X
Buy a bowden extruder that you can easily convert to a Direct Drive extruder later. The required accessory to attach a Slice Engineering hotend is included.
Inhalt 1 Stück
101,00 € *
Versandkostenfrei!
Bondtech LGX™ DD For Artillery Sidewinder X1 With Mosquito™ Magnum This is a LGX™ Direct Drive Setu
Bondtech LGX™ DD For Artillery Sidewinder X1...
This is a LGX™ Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Mosquito™ (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are included.
Inhalt 1 Stück
323,00 € *
Versandkostenfrei!
Bondtech LGX™ DD for Artillery Sidewinder X1 With Mosquito
Bondtech LGX™ DD for Artillery Sidewinder X1...
This is a LGX™ Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Mosquito™ (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are included. The Mosquito fan needs a connector change that we perform...
302,00 € *
Versandkostenfrei!
Bondtech LGX™ DD for Artillery Sidewinder X1 With Copperhead
Bondtech LGX™ DD for Artillery Sidewinder X1...
This is a LGX™ Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Copperhead™ (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are included. The Mosquito fan needs a connector change that we perform...
Inhalt 1 Stück
251,00 € *
Versandkostenfrei!
Bondtech LGX™ DD for Artillery Sidewinder X1 For Mosquito
Bondtech LGX™ DD for Artillery Sidewinder X1...
This is a LGX™ Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use MOsquito™ (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are not included.
Inhalt 1 Stück
126,00 € *
Versandkostenfrei!
Bondtech LGX™ DD For Artillery Sidewinder X1 For Copperhead
Bondtech LGX™ DD For Artillery Sidewinder X1...
This is a LGX™ Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Copperhead™ (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are not included.
Inhalt 1 Stück
126,00 € *
Versandkostenfrei!
Bondtech LGX™ For Flexibles For Prusa MK3S
Bondtech LGX™ For Flexibles For Prusa MK3S
This is a LGX™ For Flexibles Special Setup to use on Prusa MK3S and MK3S+. It uses a Copperhead™ Hot Block and Copperhead™ LGX™ Heat Break from Slice Engineering. Master All Materials * Excel With Flexibles The LGX™ FF Print Head is a...
Inhalt 1 Stück
262,00 € *
Versandkostenfrei!
LGX™ Accessories for FF Prusa MK3S
LGX™ Accessories for FF Prusa MK3S
This LGX™ Accessories for FF Prusa MK3S is supplied with: 1x LGX™ PA12 Mount; 1x LGX™ PA12 X-carriage front 1x LGX™ PA12 X-carriage back 1x LGX™ PA12 Pinda Holder 1x LGX™ PA12 Fan Shroud 1x LGX™ PA12 Filament Sensor Box
Inhalt 1 Stück
91,00 € *
Bondtech LGX™ For Flexibles Set
Bondtech LGX™ For Flexibles Set
Designed With Flexibles In Mind The LGX™ For Flexibles Set is a special setup hotend to be used with the LGX™ eXtruder. With the LGX™ it forms a print head that will excel at printing ALL most common materials and especially the soft and...
Inhalt 1 Stück
79,00 € *
Versandkostenfrei!
LGX™ Short Plastic Set for FF on Prusa
LGX™ Short Plastic Set for FF on Prusa
This plastic parts set is for users looking to install a LGX FF on a Prusa type 3D printer that requires a different x-carriage than the original Prusa MK3S. Screws, nuts, cables and other mounting accessories are not included in this set.
Inhalt 1 Stück
50,00 € *
LGX™ Accessories For Sidewinder X1 and Mosquito™
LGX™ Accessories For Sidewinder X1 and Mosquito™
This LGX™ set is supplied with: 1x LGX™ PA12 Fan Shroud for Mosquito™; 1x LGX™ PA12 Z-axis end switch adapter 2x M2.5×10 button head screw
Inhalt 1 Stück
25,00 € *
LGX™ Accessories For Sidewinder X1 and Copperhead™
LGX™ Accessories For Sidewinder X1 and Copperhead™
This LGX™ set is supplied with: 1x LGX™ PA12 Fan Shroud for Copperhead™; 1x LGX™ PA12 Z-axis end switch adapter 2x M2.5×10 button head screw
Inhalt 1 Stück
25,00 € *
LGX™ Pancake 25mm Stepper Motor
LGX™ Pancake 25mm Stepper Motor
Spare part to replace the pancake 25mm stepper motor and motor gear on a Bondtech LGX™ Large Gears eXtruder.
Inhalt 1 Stück
28,00 € *
2 von 3
Zuletzt angesehen