Flexion extruder with an E3D mount. Comes with everything shown in the box: Flexion extruder E3D mounting block PTFE tube that fits the E3D v6 hotend (plus a spare) Clamp plate and mounting screws Spare brush Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm Does NOT include the stepper motor or hotend.. Those can be ordered here. Dual E3D mount. Includes the mounting block and clamp plates, two mirrored Flexion Extruder drives, PTFE tubes for E3Dv6 hotend, and 4 nozzles: 0.3, 0.5, 0.6, 0.8. Does NOT include the E3D hotend, as pictured. 3D printer extruder retrofit kit for E3D v6 hotend (1.75mm). This allows the use of the Flexion Extruder with the excellent E3D hotends – enabling precision extrusion of virtually every available filament from Nylon to ultra-flexible Shore 50A. This uses the same mounting hole pattern as the E3D extruder, and also has a couple mounting holes in the front (see drawing). It includes a PTFE tube cut to length for the E3D v6 hotends. So you’ll have all the same advantages of precision, supported, reliable filament driving with the flexibility to print at much higher temperatures. This kit is appropriate for RepRap and Lulzbot printers by following instructions here. Includes: Flexion extruder E3D mounting block Precision cut PTFE guide tube (plus a spare), and alignment collar. Clamp plate and mounting screws Spare brush Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm orifice Includes Mounting block and mounting hardware Tensioning arm with idler and cleaning brush (one right and one left) Adjustment cam Drive gear Nozzles: 0.2, 0.3, 0.4, and 0.5 mm orifice 2 PTFE feed tubes Spare cleaning brushes “Flexion inside” quick-guide sticker Note: does not include stepper motor or hotend Installation Instructions for Printers The Flexion Extruder is a drop-in upgrade on most common printers  

Description High-temperature 3D printer extruder upgrade or retrofit kit for common 3D printers. This upgrade allows printing of materials at up to 290°C. The barrel is designed in collaboration with Micro Swiss. The finned mounting block has several advantages: Better thermal performance Visibility of extruder (you can remove your stock heatsink – but continue to use the fan) Easy removal of the hotend without disassembling the motor and extruder (tool access between fan blades) This kit requires you to disassemble your printer’s extruder and reinstall this upgrade. Instructions will be posted soon. Note: the HT mounting block does NOT include an M6 mounting hole, necessary for HICTOP and some other eBay kit printers.   Additional information   Weight 1 oz Dimensions 3 × 4 × 1 in Works with Flashforge Creator, Monoprice Dual, Wanhao 4S, Powerspec Ultra, and many others (see support pages)

Adapter für die Benutzung von e3D V6 1.75 mm Hotends components. Es fehlt Heatbreak und Heizblock.Druckbare Lüftung https://www.thingiverse.com/thing:2745671Gleiche Länge wie Original r3dv2.Gewicht nur 24 g vs 30 gr 

Upgrade für Raise3D N2 Serie So machen Sie die Lüfter steuerbar! Bei der Originalkonstruktion von Raise3D kann man zwar in der Software die Lüftergeschwindigkeit (in %) verändert, dies hat aber auf die beiden montierten Lüfter keinen Einfluss. Diese Upgrade ändert dies. Zusätzliche zwei Lüfter (original Raise3D Ersatzteile) sind nun über die Software ideaMaker und das Touchdisplay steuerbar. Der Luftstrom geht direkt auf die Düsen und kann somit z.B. bei PLA gerade bei "Bridging" wahre Wunder bewirken. Bitte beachten Sie, dass die beiden Lüfter nur gemeinsam angesteuert werden können. Die beiden anderen Lüfter laufen immer und verhindern ein Überhitzen des Druckkopfs.    Zur Montage des neuen Lüfterkäfigs müssen die beiden alten Lüfter samt Halterung demontiert werden. Vier zusätzliche Schrauben zur Montage des neuen Lüfterkäfigs liegen bei.   Lieferumfang: Lüfterkäfig (3D-gedruckt im SLA-Verfahren) 4 Lüfter von Raise3D inklusive Schrauben 4 Innensechskantschrauben (M3 x 8)