*2GT Gates belts are compatible with our full range of matching toothed pulley and idlers. For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates drive belts are considered second to none. Gates Belts offer a standard that others just can’t match: Made out of a fiberglass reinforced rubber which means it’s chemically resistant, harder wearing and doesn’t stretch whilst under stress Imbued with a nylon fabric which coats the compound of the belt and acts as both a wear resistant surface (protecting the teeth) and provides a superior grip A uniquely designed tooth profile distributes strain across the entire belt allowing the belt to handle greater loads Has 25% higher power ratings than our previous Poly Chain GT2 belts Quiet, compact, durable Purchased by the 100mm and available in various widths Product variations available for purchase   Product Title Size Internal Diameters Pitch Circle Diameter Belts Gates 2GT Belt 6mm n/a n/a   Gates 2GT Belt 9mm n/a n/a   Gates 2GT Belt 12mm n/a n/a Pulleys Gates Pulley with 16 Teeth 6mm 5mm 10.19mm   Gates Pulley with 18 Teeth 6mm 5mm 11.46mm   Gates Pulley with 20 Teeth 6mm 5mm 12.73mm   Gates Pulley with 20 Teeth 9mm 5mm 12.73mm   Gates Pulley with 20 Teeth 12mm 5mm 12.73mm Idlers *all idlers are 20-tooth equivalent Gates Toothed Idler 6mm 5mm 12.73mm   Gates Toothed Idler 9mm 5mm 12.73mm   Gates Toothed Idler 12mm 5mm 12.73mm   Gates Smoothed Idler 6mm 5mm 12.73mm   Gates Smoothed Idler 9mm 5mm 12.73mm   Gates Smoothed Idler 12mm 5mm 12.73mm

*2GT Gates belts are compatible with our full range of matching toothed pulley and idlers. For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates drive belts are considered second to none. Gates Belts offer a standard that others just can’t match: Made out of a fiberglass reinforced rubber which means it’s chemically resistant, harder wearing and doesn’t stretch whilst under stress Imbued with a nylon fabric which coats the compound of the belt and acts as both a wear resistant surface (protecting the teeth) and provides a superior grip A uniquely designed tooth profile distributes strain across the entire belt allowing the belt to handle greater loads Has 25% higher power ratings than our previous Poly Chain GT2 belts Quiet, compact, durable Purchased by the 100mm and available in various widths Product variations available for purchase   Product Title Size Internal Diameters Pitch Circle Diameter Belts Gates 2GT Belt 6mm n/a n/a   Gates 2GT Belt 9mm n/a n/a   Gates 2GT Belt 12mm n/a n/a Pulleys Gates Pulley with 16 Teeth 6mm 5mm 10.19mm   Gates Pulley with 18 Teeth 6mm 5mm 11.46mm   Gates Pulley with 20 Teeth 6mm 5mm 12.73mm   Gates Pulley with 20 Teeth 9mm 5mm 12.73mm   Gates Pulley with 20 Teeth 12mm 5mm 12.73mm Idlers *all idlers are 20-tooth equivalent Gates Toothed Idler 6mm 5mm 12.73mm   Gates Toothed Idler 9mm 5mm 12.73mm   Gates Toothed Idler 12mm 5mm 12.73mm   Gates Smoothed Idler 6mm 5mm 12.73mm   Gates Smoothed Idler 9mm 5mm 12.73mm   Gates Smoothed Idler 12mm 5mm 12.73mm

*2GT Gates belts are compatible with our full range of matching toothed pulley and idlers. For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates drive belts are considered second to none. Gates Belts offer a standard that others just can’t match: Made out of a fiberglass reinforced rubber which means it’s chemically resistant, harder wearing and doesn’t stretch whilst under stress Imbued with a nylon fabric which coats the compound of the belt and acts as both a wear resistant surface (protecting the teeth) and provides a superior grip A uniquely designed tooth profile distributes strain across the entire belt allowing the belt to handle greater loads Has 25% higher power ratings than our previous Poly Chain GT2 belts Quiet, compact, durable Purchased by the 100mm and available in various widths Product variations available for purchase   Product Title Size Internal Diameters Pitch Circle Diameter Belts Gates 2GT Belt 6mm n/a n/a   Gates 2GT Belt 9mm n/a n/a   Gates 2GT Belt 12mm n/a n/a Pulleys Gates Pulley with 16 Teeth 6mm 5mm 10.19mm   Gates Pulley with 18 Teeth 6mm 5mm 11.46mm   Gates Pulley with 20 Teeth 6mm 5mm 12.73mm   Gates Pulley with 20 Teeth 9mm 5mm 12.73mm   Gates Pulley with 20 Teeth 12mm 5mm 12.73mm Idlers *all idlers are 20-tooth equivalent Gates Toothed Idler 6mm 5mm 12.73mm   Gates Toothed Idler 9mm 5mm 12.73mm   Gates Toothed Idler 12mm 5mm 12.73mm   Gates Smoothed Idler 6mm 5mm 12.73mm   Gates Smoothed Idler 9mm 5mm 12.73mm   Gates Smoothed Idler 12mm 5mm 12.73mm

For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. Available in a selection of sizes.  These come in standard 5mm bore, with dual grub-screw holes. Suitable for attaching to most NEMA17 motors with a 5mm shaft.  

For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. Available in a selection of sizes.  These come in standard 5mm bore, with dual grub-screw holes. Suitable for attaching to most NEMA17 motors with a 5mm shaft.  

For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. Available in a selection of sizes.  These come in standard 5mm bore, with dual grub-screw holes. Suitable for attaching to most NEMA17 motors with a 5mm shaft.  

For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. Available in a selection of sizes.  These come in standard 5mm bore, with dual grub-screw holes. Suitable for attaching to most NEMA17 motors with a 5mm shaft.  

A highly recommended accompaniment to the Gates Powergrip® 2GT Belt. Available in a selection of sizes.  Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve. Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match.   For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. 5mm Internal Diameter. 12mm Outer Diameter. (Which gives an equivalent wrapped diameter to a 20 Tooth Pulley)    

A highly recommended accompaniment to the Gates Powergrip® 2GT Belt. Available in a selection of sizes.  These come in standard 5mm bore Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve. Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match. For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. Available in a selection of sizes these come in standard 5mm bore. Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve.Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match.     Product variations available for purchase   Product Title Size Internal Diameters Pitch Circle Diameter Belts Gates 2GT Belt 6mm n/a n/a   Gates 2GT Belt 9mm n/a n/a   Gates 2GT Belt 12mm n/a n/a Pulleys Gates Pulley with 16 Teeth 6mm 5mm 10.19mm   Gates Pulley with 18 Teeth 6mm 5mm 11.46mm   Gates Pulley with 20 Teeth 6mm 5mm 12.73mm   Gates Pulley with 20 Teeth 9mm 5mm 12.73mm   Gates Pulley with 20 Teeth 12mm 5mm 12.73mm Idlers *all idlers are 20-tooth equivalent Gates Toothed Idler 6mm 5mm 12.73mm   Gates Toothed Idler 9mm 5mm 12.73mm   Gates Toothed Idler 12mm 5mm 12.73mm   Gates Smoothed Idler 6mm 5mm 12.73mm   Gates Smoothed Idler 9mm 5mm 12.73mm   Gates Smoothed Idler 12mm 5mm 12.73mm

A highly recommended accompaniment to the Gates Powergrip® 2GT Belt. Available in a selection of sizes.  These come in standard 5mm bore Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve. Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match. For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. Available in a selection of sizes these come in standard 5mm bore. Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve.Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match.     Product variations available for purchase   Product Title Size Internal Diameters Pitch Circle Diameter Belts Gates 2GT Belt 6mm n/a n/a   Gates 2GT Belt 9mm n/a n/a   Gates 2GT Belt 12mm n/a n/a Pulleys Gates Pulley with 16 Teeth 6mm 5mm 10.19mm   Gates Pulley with 18 Teeth 6mm 5mm 11.46mm   Gates Pulley with 20 Teeth 6mm 5mm 12.73mm   Gates Pulley with 20 Teeth 9mm 5mm 12.73mm   Gates Pulley with 20 Teeth 12mm 5mm 12.73mm Idlers *all idlers are 20-tooth equivalent Gates Toothed Idler 6mm 5mm 12.73mm   Gates Toothed Idler 9mm 5mm 12.73mm   Gates Toothed Idler 12mm 5mm 12.73mm   Gates Smoothed Idler 6mm 5mm 12.73mm   Gates Smoothed Idler 9mm 5mm 12.73mm   Gates Smoothed Idler 12mm 5mm 12.73mm

A highly recommended accompaniment to the Gates Powergrip® 2GT Belt. Available in a selection of sizes.  These come in standard 5mm bore Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve. Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match. For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. Available in a selection of sizes these come in standard 5mm bore. Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve.Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match.     Product variations available for purchase   Product Title Size Internal Diameters Pitch Circle Diameter Belts Gates 2GT Belt 6mm n/a n/a   Gates 2GT Belt 9mm n/a n/a   Gates 2GT Belt 12mm n/a n/a Pulleys Gates Pulley with 16 Teeth 6mm 5mm 10.19mm   Gates Pulley with 18 Teeth 6mm 5mm 11.46mm   Gates Pulley with 20 Teeth 6mm 5mm 12.73mm   Gates Pulley with 20 Teeth 9mm 5mm 12.73mm   Gates Pulley with 20 Teeth 12mm 5mm 12.73mm Idlers *all idlers are 20-tooth equivalent Gates Toothed Idler 6mm 5mm 12.73mm   Gates Toothed Idler 9mm 5mm 12.73mm   Gates Toothed Idler 12mm 5mm 12.73mm   Gates Smoothed Idler 6mm 5mm 12.73mm   Gates Smoothed Idler 9mm 5mm 12.73mm   Gates Smoothed Idler 12mm 5mm 12.73mm

A highly recommended accompaniment to the Gates Powergrip® 2GT Belt. Available in a selection of sizes. Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve. Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match.   For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. 5mm Internal Diameter. 12mm Outer Diameter. (Which gives an equivalent wrapped diameter to a 20 Tooth Pulley)    

A highly recommended accompaniment to the Gates Powergrip® 2GT Belt. Available in a selection of sizes.  Toothed Idlers used appropriately in place of bearings prevent damage to the belts teeth by allowing it to glide freely and gently cups its teeth as it traverses around the curve. Smoothed Idlers are purposely designed, with correct flanges and clearance to ensure a belt retains a constant tension throughout its entire stroke in a way bearings could never match.   For over 100 years Gates Corporation has earned itself a reputation as a pioneer of power transmission and fluid power solutions, and amongst their high-quality range of products, Gates 2GT drive belts are considered second to none. These pulleys are a highly recommended accompaniment to the Gates Powergrip® 2GT Belts. 5mm Internal Diameter. 12mm Outer Diameter. (Which gives an equivalent wrapped diameter to a 20 Tooth Pulley)    

Closed Belt Länge 202mm   PowerGrip® GT3 ist ein Quantensprung im Bereich der Gummi-Synchronriementechnologie. Dieser technologisch fortgeschritteneSynchronriemen eignet sich perfekt für eine große Bandbreite industriellerAnwendungen. PowerGrip® GT3 überträgt bis zu 30% mehr Leistung alsfrühere Riemengenerationen (PowerGrip® GT2). Die komplette Produktreiheeignet sich sowohl für Neukonstruktionen als auch als Ersatz bei existierendenAntrieben ohne weitere Systemanpassungen. Die PowerGrip® GT32MGT-, 3MGT- und 5MGT-Teilungen sind besonders geeignet für kompakteAntriebssysteme in Handwerkzeugen, Büromaschinen, Haushaltsgeräten,Präzisionsstellmotoren und Mehrachs-Anwendungen.   MarkierungEine dreiteilige Bezeichnung auf dem Riemenrücken gibt die Wirklänge, Teilung undRiemenbreite in Millimetern an.Konstruktion• Technologisch fortschrittliche Kombination aus Glasfaserzugsträngen, Elastomerzähnenund -rücken, und Nylongewebe.• Der verschleißfeste Elastomerrücken schützt den Riemen vor äußerer Beanspruchungund Abnutzung durch Reibung.• Die fortlaufend spiralförmig aufgewickelten Glasfaserzugstränge zeichnen sich durcheine große Zugfestigkeit, eine außerordentlich gute Biegewilligkeit und eine geringeDehnung aus.• Der Nylonüberzug mit niedrigem Reibungskoeffizienten schützt die Zahnoberflächevor Abnutzung.• Die präzise Form und Teilung der Elastomerzähne garantieren einen exakten Eingriffmit den Zahnlücken der Zahnscheibe.• 5MGT ist lieferbar in silikonfreier Konstruktion und daher geeignet fürLackiereinrichtungen.• Geeignet für Scheiben vom Typ GT.Vorzüge• Wesentlich größere Leistungsübertragung: bis zu 30% mehr als frühere Konstruktionen.• Kompakte, leichte Antriebe.• Hohe Positioniergenauigkeit.• Verbessertes Zahnübersprungverhalten.• Geringe Geräuschentwicklung.• Kosteneinsparungen, längere Laufzeit und niedriger Wartungsbedarf.   Farbe Schwarz Breite  (mm) 6,0 Gewicht  (kg) 0,007 Doppelseitig Nein Typ 2MGT Werkstoff CR Temperaturbeständigkeit -30 bis +120 Profilform GT Profilhöhe  (mm) 1,52 Maximale Riemengeschwindigkeit  (m/s) 80,0 Handelsmarke PowerGrip® GT3 Verstärkungsmaterial Nylon Anzahl der Zähne 101 Teilung [mm]  (mm) 2,0 Zahn Höhe[mm]  (mm) 0,71 Zugstrang Faser

Closed Belt Länge 600mm   PowerGrip® GT3 ist ein Quantensprung im Bereich der Gummi-Synchronriementechnologie. Dieser technologisch fortgeschritteneSynchronriemen eignet sich perfekt für eine große Bandbreite industriellerAnwendungen. PowerGrip® GT3 überträgt bis zu 30% mehr Leistung alsfrühere Riemengenerationen (PowerGrip® GT2). Die komplette Produktreiheeignet sich sowohl für Neukonstruktionen als auch als Ersatz bei existierendenAntrieben ohne weitere Systemanpassungen. Die PowerGrip® GT32MGT-, 3MGT- und 5MGT-Teilungen sind besonders geeignet für kompakteAntriebssysteme in Handwerkzeugen, Büromaschinen, Haushaltsgeräten,Präzisionsstellmotoren und Mehrachs-Anwendungen.   MarkierungEine dreiteilige Bezeichnung auf dem Riemenrücken gibt die Wirklänge, Teilung undRiemenbreite in Millimetern an.Konstruktion• Technologisch fortschrittliche Kombination aus Glasfaserzugsträngen, Elastomerzähnenund -rücken, und Nylongewebe.• Der verschleißfeste Elastomerrücken schützt den Riemen vor äußerer Beanspruchungund Abnutzung durch Reibung.• Die fortlaufend spiralförmig aufgewickelten Glasfaserzugstränge zeichnen sich durcheine große Zugfestigkeit, eine außerordentlich gute Biegewilligkeit und eine geringeDehnung aus.• Der Nylonüberzug mit niedrigem Reibungskoeffizienten schützt die Zahnoberflächevor Abnutzung.• Die präzise Form und Teilung der Elastomerzähne garantieren einen exakten Eingriffmit den Zahnlücken der Zahnscheibe.• 5MGT ist lieferbar in silikonfreier Konstruktion und daher geeignet fürLackiereinrichtungen.• Geeignet für Scheiben vom Typ GT.Vorzüge• Wesentlich größere Leistungsübertragung: bis zu 30% mehr als frühere Konstruktionen.• Kompakte, leichte Antriebe.• Hohe Positioniergenauigkeit.• Verbessertes Zahnübersprungverhalten.• Geringe Geräuschentwicklung.• Kosteneinsparungen, längere Laufzeit und niedriger Wartungsbedarf.   Farbe Schwarz Breite  (mm) 6,0 Gewicht  (kg) 0,007 Doppelseitig Nein Typ 2MGT Werkstoff CR Temperaturbeständigkeit -30 bis +120 Profilform GT Profilhöhe  (mm) 1,52 Maximale Riemengeschwindigkeit  (m/s) 80,0 Handelsmarke PowerGrip® GT3 Verstärkungsmaterial Nylon Anzahl der Zähne 300,0 Teilung [mm]  (mm) 2,0 Zahn Höhe[mm]  (mm) 0,71 Zugstrang Faser

Zum einfachen Riemen spannen und gespannt halten, einfädeln und mehr Präzision geniessen.

Zum einfachen Riemen spannen und gespannt halten, einfädeln und mehr Präzision geniessen.