Tungsten Carbide Nozzle

Tungsten Carbide Nozzle
71,00 € *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 1-7 Werktage

Für:

  • YP10767
Ultra wear resistant The high hardness of tungsten carbide will provide a carefree extrusion... mehr
Produktinformationen "Tungsten Carbide Nozzle"

Ultra wear resistant

The high hardness of tungsten carbide will provide a carefree extrusion experience. Its unparalleled wear resistance will ensure that both the nozzle diameter and flat will keep the same dimension, and so will your printed parts.

 

Low pushing force

The high thermal conductivity of both the nozzle tip and body will pump all the required heat to maintain an even temperature while extruding. Viscosity highly depends on the plastic temperature for a constant shear rate. The flow pressure will be constant resulting in excellent results and stability. The ease of pushing the filament will give an extra margin for your extruder safety.

 

Faster speed

Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. The special shape inside the nozzle allowed by the manufacturing technique improves the flow where the diameter gets reduced, thus allowing a faster flow rate.

 

Low friction

The whole nozzle is electroless nickel plated for enhanced slippery properties. Plastic will slide on the nozzle instead of sticking to it. This result is cleaner parts and less dragging problems.

 

Any material

From printing PLA to carbon fiber reinforced plastics, this nozzle can handle anything. The low friction coating greatly helps with flexible filaments allowing, them to slide through the nozzle. A single nozzle will offer quality prints, wear resistance, and high flow, so there is no need to get a ton of different nozzles when a single one can offer the best of all worlds.

 

Unbeatable price/performance

Tungsten carbide is easier to produce than corundum (Sapphire, Ruby, etc) and the performance is very similar for abrasion and much more performant for thermal conductivity. The use of steel makes it very easy to manufacture and offers amazing thermal performance. The whole package is a win-win situation in terms of performance and price.

 

Refer for the following table for absolute maximum torque. Make sure your hotend specification are within these limits.
 
Maximum torque (Nm)
  M6-1.75mm M6-3.00mm M6-3.00mm HF M7 MK10 M10 UM3
25 3.8 3.4 3.4 5.4 22.8 3.8
200 3.1 2.8 2.8 4.4 18.5 3.1
300 2.7 2.4 2.4 3.8 15.9 2.6
400 2.2 2.0 2.0 3.2 13.4 2.2

 

General specifications
Housing material High thermal conductivity steel
Tip material Tungsten carbide, Fine Grade
Is eletrical conductive Yes
Maximum working temperature 500 °C
Maximum working pressure 25 MPa
Weiterführende Links zu "Tungsten Carbide Nozzle"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Tungsten Carbide Nozzle"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Wenn Sie sich Anmelden könnten Sie einen Gutschein für ihre Bewertung erhalten

Die mit einem * markierten Felder sind Pflichtfelder.

Nozzle kit Nozzle kit
Inhalt 1 Stück
117,00 € *
Individual Nozzles Individual Nozzles
Inhalt 1 Stück
ab 23,00 € *
Individual Nozzles Individual Nozzles
Inhalt 1 Stück
ab 23,00 € *
Heat Break Replacement Heat Break Replacement
Inhalt 1 Stück
ab 12,00 € *
V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,15 € *
Heat Block replacement Heat Block replacement
Inhalt 1 Stück
ab 10,00 € *
Thermistor 300°C/500°C Thermistor 300°C/500°C
Inhalt 1 Stück
ab 10,00 € *
Sealing Washers kit Sealing Washers kit
Inhalt 1 Stück
5,00 € *
Radiallüfter 40x40x20 24V Radiallüfter 40x40x20 24V
Inhalt 1 Stück
3,99 € *
Versandkostenfrei!
Prusa V6 HotEnd Prusa V6 HotEnd
Inhalt 1 Stück
ab 69,15 € *
Versandkostenfrei!
GREENTEC PRO Carbon 1.75mm GREENTEC PRO Carbon 1.75mm
Inhalt 0.8 Kilogramm (62,50 € * / 1 Kilogramm)
50,00 € *
BMG-M Extruder BMG-M Extruder
Inhalt 1 Stück
84,00 € *
Versandkostenfrei!
CPE HG100 Flash Yellow Metallic 1.75mm CPE HG100 Flash Yellow Metallic 1.75mm
Inhalt 0.75 Kilogramm (46,67 € * / 1 Kilogramm)
35,00 € *
Versandkostenfrei!
Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm
Inhalt 1 Stück
37,00 € *
Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm)
Inhalt 0.1 Laufende(r) Meter (18,50 € * / 1 Laufende(r) Meter)
1,85 € *
Heater Cartridge 12VDC/24VDC Heater Cartridge 12VDC/24VDC
Inhalt 1 Stück
8,00 € *
Fan 12V/24V DC Fan 12V/24V DC
Inhalt 1 Stück
8,00 € *
Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt
Inhalt 1 Stück
4,99 € *
High Precision Heater Cartridge 12V/24V High Precision Heater Cartridge 12V/24V
Inhalt 1 Stück
ab 20,00 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
9,00 € *
Radiallüfter 40x40x20 Radiallüfter 40x40x20
Inhalt 1 Stück
3,99 € *
v6 Extra Nozzle - 1.75mm x 0.60mm v6 Extra Nozzle - 1.75mm x 0.60mm
Inhalt 1 Stück
6,52 € *
Individual Nozzles Individual Nozzles
Inhalt 1 Stück
ab 23,00 € *
Versandkostenfrei!
NEU
Revo™ ObXidian Nozzles Revo™ ObXidian Nozzles
Inhalt 1 Stück
54,00 € *
Versandkostenfrei!
Nozzle X - Volcano Nozzle X - Volcano
Inhalt 1 Stück
39,00 € *
Versandkostenfrei!
Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm
Inhalt 1 Stück
37,00 € *
Thermistor 300°C/500°C Thermistor 300°C/500°C
Inhalt 1 Stück
ab 10,00 € *
Heat Break Replacement Heat Break Replacement
Inhalt 1 Stück
ab 12,00 € *
Heat Block replacement Heat Block replacement
Inhalt 1 Stück
ab 10,00 € *
Hotend Dice V2 24V Hotend Dice V2 24V
Inhalt 1 Stück
ab 35,00 € *
Water Cooling Kit Water Cooling Kit
Inhalt 1 Stück
115,00 € *
Filament Sentinel 1.75mm Filament Filament Sentinel 1.75mm Filament
Inhalt 1 Stück
43,00 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 14,06 € *
PushFit – 4mm Tube Through PushFit – 4mm Tube Through
Inhalt 1 Stück
4,60 € *
v6 Extra Nozzle - 3mm x 0.40mm v6 Extra Nozzle - 3mm x 0.40mm
Inhalt 1 Stück
6,52 € *
Zuletzt angesehen