Versandkostenfrei bis zum Ende des Lockdowns.

Hallo Freunde des gemütlichen Plastikschmelzens,

Und in der Zeit des Lockdowns(ab 15.12.2020) keine Versandkosten und ab 80€ Einkaufswert 4,99 Rabatt mit Gutscheincode "Lockdown", einzugeben auf der  "Warenkorb bearbeiten" Seite, nicht einlösbar auf Gutscheine .


Tungsten Carbide Nozzle 0.4mm

Tungsten Carbide Nozzle 0.4mm
65,00 € *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 1-7 Werktage

Für:

  • YP10767
Ultra wear resistant The high hardness of tungsten carbide will provide a carefree extrusion... mehr
Produktinformationen "Tungsten Carbide Nozzle 0.4mm"

Ultra wear resistant

The high hardness of tungsten carbide will provide a carefree extrusion experience. Its unparalleled wear resistance will ensure that both the nozzle diameter and flat will keep the same dimension, and so will your printed parts.

 

Low pushing force

The high thermal conductivity of both the nozzle tip and body will pump all the required heat to maintain an even temperature while extruding. Viscosity highly depends on the plastic temperature for a constant shear rate. The flow pressure will be constant resulting in excellent results and stability. The ease of pushing the filament will give an extra margin for your extruder safety.

 

Faster speed

Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. The special shape inside the nozzle allowed by the manufacturing technique improves the flow where the diameter gets reduced, thus allowing a faster flow rate.

 

Low friction

The whole nozzle is electroless nickel plated for enhanced slippery properties. Plastic will slide on the nozzle instead of sticking to it. This result is cleaner parts and less dragging problems.

 

Any material

From printing PLA to carbon fiber reinforced plastics, this nozzle can handle anything. The low friction coating greatly helps with flexible filaments allowing, them to slide through the nozzle. A single nozzle will offer quality prints, wear resistance, and high flow, so there is no need to get a ton of different nozzles when a single one can offer the best of all worlds.

 

Unbeatable price/performance

Tungsten carbide is easier to produce than corundum (Sapphire, Ruby, etc) and the performance is very similar for abrasion and much more performant for thermal conductivity. The use of steel makes it very easy to manufacture and offers amazing thermal performance. The whole package is a win-win situation in terms of performance and price.

 

Refer for the following table for absolute maximum torque. Make sure your hotend specification are within these limits.
 
Maximum torque (Nm)
  M6-1.75mm M6-3.00mm M6-3.00mm HF M7 MK10 M10 UM3
25 3.8 3.4 3.4 5.4 22.8 3.8
200 3.1 2.8 2.8 4.4 18.5 3.1
300 2.7 2.4 2.4 3.8 15.9 2.6
400 2.2 2.0 2.0 3.2 13.4 2.2

 

General specifications
Housing material High thermal conductivity steel
Tip material Tungsten carbide, Fine Grade
Is eletrical conductive Yes
Maximum working temperature 500 °C
Maximum working pressure 25 MPa
Weiterführende Links zu "Tungsten Carbide Nozzle 0.4mm"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Tungsten Carbide Nozzle 0.4mm"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Wenn Sie sich Anmelden könnten Sie einen Gutschein für ihre Bewertung erhalten

Die mit einem * markierten Felder sind Pflichtfelder.

Nozzle kit Nozzle kit
Inhalt 1 Stück
117,00 € *
Individual Nozzles Individual Nozzles
Inhalt 1 Stück
ab 23,00 € *
Individual Nozzles Individual Nozzles
Inhalt 1 Stück
ab 23,00 € *
V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,15 € *
Heat Break Replacement Heat Break Replacement
Inhalt 1 Stück
12,00 € *
Heat Block replacement Heat Block replacement
Inhalt 1 Stück
ab 10,00 € *
Radiallüfter 40x40x20 24V Radiallüfter 40x40x20 24V Radiallüfter 40x40x20 24V
Inhalt 1 Stück
3,99 € *
Versandkostenfrei!
Prusa V6 HotEnd Prusa V6 HotEnd Prusa V6 HotEnd
Inhalt 1 Stück
ab 69,15 € *
Versandkostenfrei!
GREENTEC PRO Carbon 1.75mm GREENTEC PRO Carbon 1.75mm GREENTEC PRO Carbon 1.75mm
Inhalt 0.8 Kilogramm (62,50 € * / 1 Kilogramm)
50,00 € *
BMG-M Extruder BMG-M Extruder BMG-M Extruder
Inhalt 1 Stück
84,00 € *
Versandkostenfrei!
CPE HG100 Flash Yellow Metallic 1.75mm CPE HG100 Flash Yellow Metallic 1.75mm CPE HG100 Flash Yellow Metallic 1.75mm
Inhalt 0.75 Kilogramm (46,67 € * / 1 Kilogramm)
35,00 € *
Versandkostenfrei!
Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm
Inhalt 1 Stück
34,08 € *
Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm)
Inhalt 0.1 Laufende(r) Meter (18,50 € * / 1 Laufende(r) Meter)
1,85 € *
Socks für CR10 Socks für CR10 Socks für CR10
Inhalt 1 Stück
2,00 € *
Thermistor 300°C/500°C Thermistor 300°C/500°C Thermistor 300°C/500°C
Inhalt 1 Stück
ab 10,00 € *
Fan 12V/24V DC Fan 12V/24V DC Fan 12V/24V DC
Inhalt 1 Stück
8,00 € *
Sealing Washers kit Sealing Washers kit
Inhalt 1 Stück
5,00 € *
Titan Aqua Titan Aqua Titan Aqua
Inhalt 1 Stück
ab 173,26 € *
Radiallüfter 40x40x20 Radiallüfter 40x40x20 Radiallüfter 40x40x20
Inhalt 1 Stück
3,99 € *
v6 Extra Nozzle - 1.75mm x 0.60mm v6 Extra Nozzle - 1.75mm x 0.60mm v6 Extra Nozzle - 1.75mm x 0.60mm
Inhalt 1 Stück
6,52 € *
Bondtech Coated Nozzle M6×0.75×5×13 1.75 Bondtech Coated Nozzle M6×0.75×5×13 1.75
Inhalt 1 Stück
ab 16,10 € *
Individual Nozzles Individual Nozzles
Inhalt 1 Stück
ab 23,00 € *
Merlin Düsenwerkzeug Merlin Düsenwerkzeug Merlin Düsenwerkzeug
Inhalt 1 Stück
10,00 € *
Versandkostenfrei!
Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm
Inhalt 1 Stück
34,08 € *
Gates Powergrip® *2GT* Belt 6mm x 100mm Gates Powergrip® *2GT* Belt 6mm x 100mm Gates Powergrip® *2GT* Belt 6mm x 100mm
Inhalt 0.1 Laufende(r) Meter (8,50 € * / 1 Laufende(r) Meter)
0,85 € *
Heat Block replacement Heat Block replacement
Inhalt 1 Stück
ab 10,00 € *
Versandkostenfrei!
NEU
Versandkostenfrei!
Buildplate 310x310mm GeckoTek Hot CR10 Buildplate 310x310mm GeckoTek Hot CR10 Buildplate 310x310mm GeckoTek Hot CR10
Inhalt 1 Stück
33,00 € *
Versandkostenfrei!
Versandkostenfrei!
Creality3D CR-10 V2 Extruder Kit Creality3D CR-10 V2 Extruder Kit Creality3D CR-10 V2 Extruder Kit
Inhalt 1 Stück
92,00 € *
Merlin Mini Hotend 1.75mm 24V Merlin Mini Hotend 1.75mm 24V Merlin Mini Hotend 1.75mm 24V
Inhalt 1 Stück
70,00 € *
Merlin Hotend Set 1.75mm V3 Merlin Hotend Set 1.75mm V3 Merlin Hotend Set 1.75mm V3
Inhalt 1 Stück
50,00 € *
PT1000 Temperature Sensor PT1000 Temperature Sensor PT1000 Temperature Sensor
Inhalt 1 Stück
21,92 € *
Versandkostenfrei!
Versandkostenfrei!
E3D Hemera Bowden Kit E3D Hemera Bowden Kit E3D Hemera Bowden Kit
Inhalt 1 Stück
99,99 € *
Versandkostenfrei!
E3D Hemera Direct Kit E3D Hemera Direct Kit E3D Hemera Direct Kit
Inhalt 1 Stück
129,95 € *
Versandkostenfrei!
Volcano HotEnd Volcano HotEnd Volcano HotEnd
Inhalt 1 Stück
ab 67,00 € *
Gates Powergrip® *2GT* Belt 12mm x 100mm Gates Powergrip® *2GT* Belt 12mm x 100mm Gates Powergrip® *2GT* Belt 12mm x 100mm
Inhalt 0.1 Laufende(r) Meter (15,80 € * / 1 Laufende(r) Meter)
1,58 € *
Gates Powergrip® *2GT* Belt 9mm x 100mm Gates Powergrip® *2GT* Belt 9mm x 100mm Gates Powergrip® *2GT* Belt 9mm x 100mm
Inhalt 0.1 Laufende(r) Meter (11,90 € * / 1 Laufende(r) Meter)
1,19 € *
High Temperature Heater Cartridges High Temperature Heater Cartridges High Temperature Heater Cartridges
Inhalt 1 Stück
68,00 € *
Plated Copper Volcano Block Plated Copper Volcano Block Plated Copper Volcano Block
Inhalt 1 Stück
38,15 € *
Plated Copper Nozzles - Volcano Plated Copper Nozzles - Volcano Plated Copper Nozzles - Volcano
Inhalt 1 Stück
ab 18,00 € *
Versandkostenfrei!
3x Pri-Mat3d PLA 1,75mm 16 Farben 3x Pri-Mat3d PLA 1,75mm 16 Farben
Inhalt 2.4 Kilogramm (20,00 € * / 1 Kilogramm)
48,00 € *
Versandkostenfrei!
Heat Break Replacement Heat Break Replacement
Inhalt 1 Stück
12,00 € *
Hotend Dice V2 24V Hotend Dice V2 24V Hotend Dice V2 24V
Inhalt 1 Stück
ab 35,00 € *
Titan Aqua Titan Aqua Titan Aqua
Inhalt 1 Stück
ab 173,26 € *
BLTouch-smart V3.1 BLTouch-smart V3.1 BLTouch-smart V3.1
Inhalt 1 Stück
ab 39,00 € *
Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6
Inhalt 1 Stück
23,06 € *
Water cooled Heatsink Water cooled Heatsink Water cooled Heatsink
Inhalt 1 Stück
33,50 € *
Micro Swiss MK10 All Metal Hotend Kit Micro Swiss MK10 All Metal Hotend Kit
Inhalt 1 Stück
38,00 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 14,06 € *
Zuletzt angesehen