BLTouch-smart V3.0 Version ab 5.4.2019

39,00 € *
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 1-7 Werktage

Mit Verlängerungskabeln:

Mit Breakout Board PIN 27 für CR10/Ender3:

  • bltouch-smart.1
Version V3.0 Logic Voltage free: 3.3V / 5V logic voltage free Long Stroke: The stroke... mehr
Produktinformationen "BLTouch-smart V3.0 Version ab 5.4.2019"

Version V3.0

Logic Voltage free: 3.3V / 5V logic voltage free

Long Stroke: The stroke becomes 1.6mm longer than the previous stroke.

 

Summary

BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

Features

Main functions and controls of BLTouch are the same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board.

BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.

Simple

BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.

Smart

Self-test : The push pin operate two times in a test when the power is on.

Alarm : The LED light blinks if a problem was found on a self-test or during operation.

High-precision

BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.

■ BLTouch 

BLTouch must be installed perpendicular to the ground.

If BLTouch push-pin can't be perpendicular to the ground, BLTouch will out put wrong signal.

Weitere Anleitungen hier:

https://www.antclabs.com/manual

https://www.antclabs.com/wiring

 

Package List

 

1 X BLTouch(BLTouch-Smart)

Spare parts - for just in case something happens

(We do not provide spare parts to 3D printer makers) 2 X Screw & Nut & Washer

2 X Dupont Housing Shell 3Pin

2 X Dupont Housing Shell 2Pin

2 X Dupont Housing Shell 1Pin

10 X Dupont Terminal

1 X Jumper Cap

Vorlagen zum befestigen:

https://www.thingiverse.com/search?q=bltouch&dwh=505bb733ea64bf4

 

Weiterführende Links zu "BLTouch-smart V3.0 Version ab 5.4.2019"
Downloads "BLTouch-smart V3.0 Version ab 5.4.2019"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "BLTouch-smart V3.0 Version ab 5.4.2019"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3) V6 Silicone Socks (Pack of 3)
Inhalt 1 Stück
5,00 € *
Versandkostenfrei!
Extrudr MF-PETG 30 Farben zur Auswahl! Extrudr MF-PETG 30 Farben zur Auswahl! Extrudr MF-PETG 30 Farben zur Auswahl!
Inhalt 1.1 Kilogramm (35,45 € * / 1 Kilogramm)
ab 39,00 € *
Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm)
Inhalt 0.1 Laufende(r) Meter (13,00 € * / 1 Laufende(r) Meter)
1,30 € *
Socks für CR10 Socks für CR10 Socks für CR10
Inhalt 1 Stück
2,00 € *
Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt
Inhalt 1 Stück
4,99 € *
RADDS Board V1.6 12V/24V RADDS Board V1.6 12V/24V
Inhalt 1 Stück
57,90 € *
v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm v6 Extra Nozzle - 1.75mm x 0.40mm
Inhalt 1 Stück
7,39 € *
GT2 Riemen meterweise GT2 Riemen meterweise
Inhalt 1 Laufende(r) Meter
4,99 € *
BMG Extruder BMG Extruder BMG Extruder
Inhalt 1 Stück
84,00 € *
Versandkostenfrei!
2x Pri-Mat3d PLA 1.75mm 16 Farben 2x Pri-Mat3d PLA 1.75mm 16 Farben
Inhalt 1.6 Kilogramm (21,88 € * / 1 Kilogramm)
35,00 € *
Silicone Socks for Volcano - Pack of 3 Silicone Socks for Volcano - Pack of 3 Silicone Socks for Volcano - Pack of 3
Inhalt 3 Stück (2,33 € * / 1 Stück)
7,00 € *
Thermistor Cartridge Thermistor Cartridge
Inhalt 1 Stück
6,29 € *
Radiallüfter 40x40x20 Radiallüfter 40x40x20 Radiallüfter 40x40x20
Inhalt 1 Stück
3,99 € *
smartABS 3mm 500g Farbe nach Wahl smartABS 3mm 500g Farbe nach Wahl smartABS 3mm 500g Farbe nach Wahl
Inhalt 0.5 Kilogramm (14,00 € * / 1 Kilogramm)
7,00 € *
RADDS Hall-E Endstop (3,3-5Volt) RADDS Hall-E Endstop (3,3-5Volt) RADDS Hall-E Endstop (3,3-5Volt)
Inhalt 1 Stück
7,95 € *
1m Bowden (1.75mm Filament) 1m Bowden (1.75mm Filament)
Inhalt 1 Stück
10,00 € *
Versandkostenfrei!
RADDS 1.6 Premiumset Display-Due-RADDS-4xRAPS128 Treiber RADDS 1.6 Premiumset...
Inhalt 1 Stück
199,00 € *
Ø1,75mm PETG Refill 800g Ø1,75mm PETG Refill 800g
Inhalt 0.8 Kilogramm (25,00 € * / 1 Kilogramm)
20,00 € *
Plated Copper Nozzles - Volcano Plated Copper Nozzles - Volcano Plated Copper Nozzles - Volcano
Inhalt 1 Stück
18,00 € *
Versandkostenfrei!
3x Pri-Mat3d PLA 1,75mm 16 Farben 3x Pri-Mat3d PLA 1,75mm 16 Farben
Inhalt 2.4 Kilogramm (20,00 € * / 1 Kilogramm)
48,00 € *
EZ-Stik Cold 3D Printer Build Surface EZ-Stik Cold 3D Printer Build Surface
Inhalt 1 Stück
ab 16,00 € *
Titan Aero HotEnd and Extruder Titan Aero HotEnd and Extruder Titan Aero HotEnd and Extruder
Inhalt 1 Stück
ab 123,00 € *
Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w Heater Cartridge - 24v - 40w
Inhalt 1 Stück
7,00 € *
PET-G YouPrintin3D viele Farben nach Wahl PET-G YouPrintin3D viele Farben nach Wahl
Inhalt 1 Kilogramm
26,00 € *
Titan Extruder Titan Extruder Titan Extruder
Inhalt 1 Stück
ab 66,00 € *
Hobb-Goblin - 5mm ID Drive Gear Hobb-Goblin - 5mm ID Drive Gear Hobb-Goblin - 5mm ID Drive Gear
Inhalt 1 Stück
12,00 € *
Optokopplerplatine zum selber löten Optokopplerplatine zum selber löten Optokopplerplatine zum selber löten
Inhalt 1 Stück
7,50 € *
GT2 Pulley 16 Zähne GT2 Pulley 16 Zähne
Inhalt 1 Stück
5,29 € *
GT2 Pulley 20Zähne GT2 Pulley 20Zähne
Inhalt 1 Stück
5,29 € *
Markenlager LMU8 Linearlager 4-reihig Markenlager LMU8 Linearlager 4-reihig
Inhalt 1 Stück
ab 4,69 € *
smartABS 1.75mm Farbe nach Wahl smartABS 1.75mm Farbe nach Wahl
Inhalt 0.75 Kilogramm (35,99 € * / 1 Kilogramm)
26,99 € *
RADDS Board V1.6 12V/24V RADDS Board V1.6 12V/24V
Inhalt 1 Stück
57,90 € *
Versandkostenfrei!
Versandkostenfrei!
NEU
Dual Flexion retrofit kit for dual extruder Dual Flexion retrofit kit for dual extruder Dual Flexion retrofit kit for dual extruder
Inhalt 1 Stück
ab 145,00 € *
Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm)
Inhalt 0.1 Laufende(r) Meter (13,00 € * / 1 Laufende(r) Meter)
1,30 € *
Versandkostenfrei!
RemRam V1.5 First Edition RemRam V1.5 First Edition RemRam V1.5 First Edition
Inhalt 1 Stück
89,00 € *
Versandkostenfrei!
2x Pri-Mat3d PLA 1.75mm 16 Farben 2x Pri-Mat3d PLA 1.75mm 16 Farben
Inhalt 1.6 Kilogramm (21,88 € * / 1 Kilogramm)
35,00 € *
Titan Aero Upgrade Kit Titan Aero Upgrade Kit Titan Aero Upgrade Kit
Inhalt 1 Stück
ab 43,00 € *
e3d lite 12V e3d lite 12V
Inhalt 1 Stück
35,00 € *
RADDS Hall-E Endstop (3,3-5Volt) RADDS Hall-E Endstop (3,3-5Volt) RADDS Hall-E Endstop (3,3-5Volt)
Inhalt 1 Stück
7,95 € *
Versandkostenfrei!
NEU
V6 Threaded Heatsink V6 Threaded Heatsink V6 Threaded Heatsink
Inhalt 1 Stück
19,50 € *
Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm Nozzle X - V6 1.75mm / 3mm
Inhalt 1 Stück
31,00 € *
12V/29A Meanwell Power Supply Bundle 12V/29A Meanwell Power Supply Bundle
Inhalt 1 Stück
ab 22,00 € *
Ersatzlüfter CR10/Creality Ersatzlüfter CR10/Creality Ersatzlüfter CR10/Creality
Inhalt 1 Stück
7,00 € *
Nema17 Pancake stepper 25mm Nema17 Pancake stepper 25mm
Inhalt 1 Stück
16,50 € *
Gates Powergrip® *2GT* Belt 9mm x 100mm Gates Powergrip® *2GT* Belt 9mm x 100mm Gates Powergrip® *2GT* Belt 9mm x 100mm
Inhalt 0.1 Laufende(r) Meter (10,00 € * / 1 Laufende(r) Meter)
1,00 € *
Ø1,75mm PETG Refill 800g 3 Rollen Ø1,75mm PETG Refill 800g 3 Rollen Ø1,75mm PETG Refill 800g 3 Rollen
Inhalt 2.4 Kilogramm (23,75 € * / 1 Kilogramm)
57,00 € *
Ø1,75mm PETG Refill 800g Ø1,75mm PETG Refill 800g
Inhalt 0.8 Kilogramm (25,00 € * / 1 Kilogramm)
20,00 € *
Versandkostenfrei!
smartstepper Motortreiber Nema17 smartstepper Motortreiber Nema17
Inhalt 1 Stück
ab 60,00 € *
Versandkostenfrei!
Plated Copper Volcano Kit Plated Copper Volcano Kit Plated Copper Volcano Kit
Inhalt 1 Stück
85,00 € *
Flexion for E3D Retrofit kit for E3D Hotend Flexion for E3D Retrofit kit for E3D Hotend Flexion for E3D Retrofit kit for E3D Hotend
Inhalt 1 Stück
ab 110,00 € *
Socks für CR10 Socks für CR10 Socks für CR10
Inhalt 1 Stück
2,00 € *
Versandkostenfrei!
Dual Extrusion+ Dual Extrusion+ Dual Extrusion+
Inhalt 1 Stück
ab 85,00 € *
Versandkostenfrei!
PLA NX2 orange 1,75mm PLA NX2 orange 1,75mm PLA NX2 orange 1,75mm
Inhalt 1.1 Kilogramm (23,64 € * / 1 Kilogramm)
26,00 € *
sparklab. ICE - wassergekühltes Hotend sparklab. ICE - wassergekühltes Hotend sparklab. ICE - wassergekühltes Hotend
Inhalt 1 Stück
ab 109,00 € *
Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse Upgradekit e3d Hotends HeatBreak+Düse
Inhalt 1 Stück
35,00 € *
Versandkostenfrei!
2x Pri-Mat3d PLA 2.85mm 16 Farben 2x Pri-Mat3d PLA 2.85mm 16 Farben 2x Pri-Mat3d PLA 2.85mm 16 Farben
Inhalt 1.6 Kilogramm (20,63 € * / 1 Kilogramm)
33,00 € *
Versandkostenfrei!
Titan Aero i3 Prusa Upgrade kit Titan Aero i3 Prusa Upgrade kit Titan Aero i3 Prusa Upgrade kit
Inhalt 1 Stück
ab 127,00 € *
Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6 Titanium Heat Break (1.75mm) for v6
Inhalt 1 Stück
46,00 € *
Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle Plated Copper-Alloy Nozzle
Inhalt 1 Stück
ab 12,49 € *
Versandkostenfrei!
Nager IT - die faire Maus Nager IT - die faire Maus
Inhalt 1 Stück
ab 32,90 € *
Versandkostenfrei!
Extrudr MF-PETG 30 Farben zur Auswahl! Extrudr MF-PETG 30 Farben zur Auswahl! Extrudr MF-PETG 30 Farben zur Auswahl!
Inhalt 1.1 Kilogramm (35,45 € * / 1 Kilogramm)
ab 39,00 € *
v6 HotEnd Full Kit - Assembled v6 HotEnd Full Kit - Assembled v6 HotEnd Full Kit - Assembled
Inhalt 1 Stück
ab 84,99 € *
Zuletzt angesehen