Versandkostenfrei bis zum Ende des Lockdowns.

Hallo Freunde des gemütlichen Plastikschmelzens,

Und in der Zeit des Lockdowns(ab 15.12.2020) keine Versandkosten und ab 80€ Einkaufswert 4,99 Rabatt mit Gutscheincode "Lockdown", einzugeben auf der  "Warenkorb bearbeiten" Seite, nicht einlösbar auf Gutscheine .


Creality3D CR-10 V2 Extruder Kit

92,00 € *
Inhalt: 1 Stück

inkl. MwSt.

Versandkostenfreie Lieferung innerhalb Deutschlands!

Lieferzeit ca. 1-7 Werktage

  • EXT-KIT-75
Updated Version This upgrade is supplied with the newest version of the Bondtech Mini Geared... mehr
Produktinformationen "Creality3D CR-10 V2 Extruder Kit"

Updated Version

This upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit.

Increase Your Printer’s Value

The Creality CR-10 V2 Extruder Kit uses Bondtech Dual Drive Gears to give extra push force and resolution plus a tighter fit between gears and housing to avoid filament jamming.

This kit is adapted for the Creality CR-10 V2 3D-printer.

Built for the Creality3D CR-10 V2

This extruder upgrade kit is for the Creality CR-10 V2 and will replace the original feeder. This kit contains no motor, the original motor is used.

Bondtech`s Dual Drive Performance

This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. It allows for a more reliable printing with all sorts of filaments, both stiff and flexible and the DualDrive system ensures that the extruder never loses grip of the filament so grinding, slipping is a thing of the past.

Lower Current Recommended

Due to the gearing ratio, the stepper motor can push filament with such force the Bowden tube can be extruded in case there is a clog. To avoid such damage, we recommend lowering the stepper motor Current to near half the original current. Check the Step By Step Guide that teaches users how to do it.

Bowden Solution

The Bowden tube is securely held in place by the 4mm threaded push-fit connector.

Reducing Filament Jams

There is now a near to 0,1mm gap between the Bondtech gears and SLS 3D printed housing that avoids filament to jam in there. An additional short PTFE Tube is added between the Extruder and the Filament Sensor to allow for easier filament loading and unloading.

SLS Printed Housing

The housing parts are professionally SLS 3D printed with polyamide for maximum strength and precision. Due to the slightly higher geometry of the extruder, the total print height will be 390 mm.

Firmware Update

The Creality3D Firmware needs to be updated in order to use this Upgrade Kit. The E-steps need to be updated to 415. Please see the installation guide on how to do it that you will find under the tab “Step By Step Guide”.
In your slicer it is also required to adjust the Maximum Z Height to 390mm using Machine Settings.

STEP BY STEP GUIDES

These are the guides that apply to the Bondtech Upgrade Kit for Creality3D CR-10 V2


01. Creality 3D CR-10 V2 – Installation


00. Stepper Current Adjustment On CR-10S

Technical Datasheet

Article number : EXT-KIT-75
EAN code : 7350011412433
Net weight : 87.5g
Gross weight : 143g
Package Size : 137x94x65mm
Gearing ratio : 3:1
E-steps value : 415

 

Weiterführende Links zu "Creality3D CR-10 V2 Extruder Kit"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Creality3D CR-10 V2 Extruder Kit"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Wenn Sie sich Anmelden könnten Sie einen Gutschein für ihre Bewertung erhalten

Die mit einem * markierten Felder sind Pflichtfelder.

Pushfit mehrere Modell Pushfit mehrere Modell
Inhalt 1 Stück
2,00 € *
Versandkostenfrei!
Versandkostenfrei!
DIRECT DRIVE SYSTEM FOR CR-10S Bondtech DIRECT DRIVE SYSTEM FOR CR-10S Bondtech DIRECT DRIVE SYSTEM FOR CR-10S Bondtech
Inhalt 1 Stück
269,00 € *
Versandkostenfrei!
2x Pri-Mat3d PLA 1.75mm 16 Farben 2x Pri-Mat3d PLA 1.75mm 16 Farben
Inhalt 1.6 Kilogramm (21,88 € * / 1 Kilogramm)
35,00 € *
Lüfter 24V 40x40x10mm MF40102V2-A99 Lüfter 24V 40x40x10mm MF40102V2-A99
Inhalt 1 Stück
8,50 € *
NEU
Everfil™PLA Ø 1.75mm 1kg Colormix - Beschreibung lesen! Everfil™PLA Ø 1.75mm 1kg Colormix -...
Inhalt 1 Kilogramm
ab 15,00 € *
Versandkostenfrei!
NEU
Laufrolle aus Kunststoff U-Nut 5x22x7mm Laufrolle aus Kunststoff U-Nut 5x22x7mm
Inhalt 1 Stück
ab 2,46 € *
LAUFROLLE MIT O-RING LAUFROLLE MIT O-RING
Inhalt 1 Stück
ab 2,67 € *
Laufrolle aus Kunststoff U-Nut 5x19x6mm Laufrolle aus Kunststoff U-Nut 5x19x6mm
Inhalt 1 Stück
ab 2,46 € *
Everfil™PLA Ø 1.75mm 1kg Everfil™PLA Ø 1.75mm 1kg Everfil™PLA Ø 1.75mm 1kg
Inhalt 1 Kilogramm
ab 16,50 € *
Versandkostenfrei!
Versandkostenfrei!
Versandkostenfrei!
E3D Hemera Direct Kit E3D Hemera Direct Kit E3D Hemera Direct Kit
Inhalt 1 Stück
129,95 € *
Compact but Powerful Motor Nema17 Compact but Powerful Motor Nema17
Inhalt 1 Stück
16,00 € *
Versandkostenfrei!
BioFusion Quick Silver BioFusion Quick Silver BioFusion Quick Silver
Inhalt 0.8 Kilogramm (31,25 € * / 1 Kilogramm)
25,00 € *
Versandkostenfrei!
BioFusion Artic White BioFusion Artic White BioFusion Artic White
Inhalt 0.8 Kilogramm (31,25 € * / 1 Kilogramm)
25,00 € *
Versandkostenfrei!
BioFusion Metallic Grey BioFusion Metallic Grey BioFusion Metallic Grey
Inhalt 0.8 Kilogramm (31,25 € * / 1 Kilogramm)
25,00 € *
Creality Ender 5 - 220*220*300 mm Creality Ender 5 - 220*220*300 mm Creality Ender 5 - 220*220*300 mm
Inhalt 1 Stück
329,00 € *
Versandkostenfrei!
Rumba32 V1.1B 32bit Control Board Rumba32 V1.1B 32bit Control Board Rumba32 V1.1B 32bit Control Board
Inhalt 1 Stück
76,94 € *
Replacement Bowden Collets for Micro Swiss CR10 Hotend kit (Set of 3) Replacement Bowden Collets for Micro Swiss CR10...
Inhalt 3 Stück (2,67 € * / 1 Stück)
8,00 € *
12V/29A Meanwell Power Supply Bundle 12V/29A Meanwell Power Supply Bundle
Inhalt 1 Stück
ab 22,00 € *
BMG Extruder New Version BMG Extruder New Version BMG Extruder New Version
Inhalt 1 Stück
84,00 € *
Gates Powergrip® *2GT* Belt 6mm x 100mm Gates Powergrip® *2GT* Belt 6mm x 100mm Gates Powergrip® *2GT* Belt 6mm x 100mm
Inhalt 0.1 Laufende(r) Meter (8,50 € * / 1 Laufende(r) Meter)
0,85 € *
Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm) Capricorn Bowden Tubing (10cm)
Inhalt 0.1 Laufende(r) Meter (18,50 € * / 1 Laufende(r) Meter)
1,85 € *
High Temperature Heater Cartridges High Temperature Heater Cartridges High Temperature Heater Cartridges
Inhalt 1 Stück
68,00 € *
Versandkostenfrei!
Ø1,75mm PETG Refill 800g 3 Rollen Ø1,75mm PETG Refill 800g 3 Rollen Ø1,75mm PETG Refill 800g 3 Rollen
Inhalt 2.4 Kilogramm (22,18 € * / 1 Kilogramm)
53,24 € *
Ø1,75mm PETG Refill 800g Ø1,75mm PETG Refill 800g
Inhalt 0.8 Kilogramm (22,19 € * / 1 Kilogramm)
ab 17,75 € *
Socks für CR10 Socks für CR10 Socks für CR10
Inhalt 1 Stück
2,00 € *
Versandkostenfrei!
PLA NX2 silber 1,75mm PLA NX2 silber 1,75mm
Inhalt 1.1 Kilogramm (23,64 € * / 1 Kilogramm)
26,00 € *
3D Lac plus 3D Lac plus 3D Lac plus
Inhalt 0.1 Liter (70,00 € * / 1 Liter)
7,00 € *
Versandkostenfrei!
TPU medium neongelb 1.75/2.85mm TPU medium neongelb 1.75/2.85mm
Inhalt 1 Stück
30,00 € *
Sensor cable Sensor cable
Inhalt 1 Stück
6,00 € *
Motor cable DyzeXtruder GT 1m Motor cable DyzeXtruder GT 1m
Inhalt 1 Stück
6,00 € *
Zuletzt angesehen