DIRECT DRIVE SYSTEM FOR CR-10S Bondtech

269,00 € *
Inhalt: 1 Stück

inkl. MwSt.

Versandkostenfreie Lieferung innerhalb Deutschlands!

Lieferzeit ca. 1-7 Werktage

In den letzten 1 Monaten 2-mal verkauft
  • YP10787
 Bondtech's Direct Drive System (DDS) for CR-10S is designed to give the user more options... mehr
Produktinformationen "DIRECT DRIVE SYSTEM FOR CR-10S Bondtech"

 Bondtech's Direct Drive System (DDS) for CR-10S is designed to give the user more options - different materials; higher flow and/or wider nozzles; thinner layers - and achieve a higher print quality. The DDS includes an integrated BMG (Bondtech Mini Geared) extruder featuring our unique Dual-Drive technology and an E3D's well known V6 All-Metal HotEnd. The DDS housing design provides an effective Hot-End cooling.  With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be used. For ease of use the system is ready to plug in once mounted on your printer. No extra cabling work and soldering is necessary.

The filament sensor holder has been reworked and is using a steel ball to allow the filament to pass the sensor in both directions.

The extruder design is inspired on Greg3D’s  “The Tank” Check out his work here: https://www.thingiverse.com/Greg191134/about.

BONDTECH DIRECT DRIVE SYSTEM

This all-in-one solution is easy to install and ready to use. Bondtech’s DDS uses our unique Dual-Drive technology with an internal gear ratio of 3:1 and 415 steps per mm. Our DDS also uses an E3D’s V6 HotEnd that allows to easily print a wide range of filaments from the market with less stringing and clogging with processing temperatures up to 285°C.

Study and test was put on the design of the housing as well. Its geometry allows for effective cooling of the HotEnd by perfecting the placement of the Sunon 4010 axial fan and the orientation of the cool air flow. Along the cooling of the HotEnd, we also achieved a more effective part cooling by using a Sunon 5015 Radial Fan and a fan shroud that focus the air flow right to the tip of the nozzle. The filament sensor housing was also redesigned. You can now properly attach it to the CR-10S with a strong grip. The steel ball we placed below the lever on the filament path, lets you feed material in booth directions, during loading and unloading. Much work was put on the power cables management and setup. Everything is ready to plug-in. No need to cut or solder. The old cables and components required to be removed, will remain intact and able to be reused.

MULTI-MATERIAL CAPABILITY

Our Bondtech extruder feeds all material with high reliability, from slippery nylons and soft TPU/TPE filaments to highly rigid and sometimes brittle carbon-filled high-strength materials. The extruder is designed for 1.75 mm filaments but has been tested to ensure performance of filament from 1.5mm up to 2.0mm allowing for high reliability regardless of the tolerance of the filament used. The V6 All-Metal Hot-End from E3D allows users to reliably print high temperature materials (up to 285°C) and it gives extra functionality to work with soft and flexible filaments. This combination opens up a wide range of opportunities for your Creality3D CR-10S.

 

BONDTECH DUAL-DRIVE

Our unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions. Bondtech users allover the world will attest that even in prints with thousands of retracts our extruders perform flawlessly, with unmatched precision, and zero damage or degradation to the filament.

Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions.

Weiterführende Links zu "DIRECT DRIVE SYSTEM FOR CR-10S Bondtech"
Downloads "DIRECT DRIVE SYSTEM FOR CR-10S Bondtech"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "DIRECT DRIVE SYSTEM FOR CR-10S Bondtech"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

CR10/CR10s MicroSwiss Hotend + Bondtech Extruder CR10/CR10s MicroSwiss Hotend + Bondtech Extruder CR10/CR10s MicroSwiss Hotend + Bondtech Extruder
Inhalt 1 Stück
ab 140,00 € *
Creality CR-10 Kit with mount Creality CR-10 Kit with mount
Inhalt 1 Stück
94,00 € *
Direct Drive System Extension Cable 40cm Direct Drive System Extension Cable 40cm Direct Drive System Extension Cable 40cm
Inhalt 1 Stück
22,00 € *
Versandkostenfrei!
Prusa I3 MK3S Extruder upgrade Prusa I3 MK3S Extruder upgrade Prusa I3 MK3S Extruder upgrade
Inhalt 1 Stück
118,00 € *
Versandkostenfrei!
Rumba32 32bit Control Board Rumba32 32bit Control Board Rumba32 32bit Control Board
Inhalt 1 Stück
50,00 € *
Water cooled Heatsink Water cooled Heatsink Water cooled Heatsink
Inhalt 1 Stück
ab 33,50 € *
Versandkostenfrei!
NEU
E3D Hemera Direct Kit E3D Hemera Direct Kit E3D Hemera Direct Kit
Inhalt 1 Stück
127,00 € *
Versandkostenfrei!
NEU
Kit DyzEND Pro + DyzeXtruder Pro 1.75mm Kit DyzEND Pro + DyzeXtruder Pro 1.75mm Kit DyzEND Pro + DyzeXtruder Pro 1.75mm
Inhalt 1 Stück
357,00 € *
CR10/CR10s MicroSwiss Hotend + Bondtech Extruder CR10/CR10s MicroSwiss Hotend + Bondtech Extruder CR10/CR10s MicroSwiss Hotend + Bondtech Extruder
Inhalt 1 Stück
ab 140,00 € *
NEU
SilentStepStick TMC5160 SilentStepStick TMC5160 SilentStepStick TMC5160
Inhalt 1 Stück
16,90 € *
Versandkostenfrei!
NEU
DyzeXtruder Pro 1.75mm Extruder DyzeXtruder Pro 1.75mm Extruder
Inhalt 1 Stück
227,00 € *
Antclabs - BLTouch Auto Bed Leveling Sensor Kabel Kit SM-XD ( 180 cm ) Antclabs - BLTouch Auto Bed Leveling Sensor...
Inhalt 1 Stück
7,00 € *
Versandkostenfrei!
All Metal Hotend Kit for Creality CR-10s PRO All Metal Hotend Kit for Creality CR-10s PRO All Metal Hotend Kit for Creality CR-10s PRO
Inhalt 1 Stück
68,00 € *
Makerbot Replicator 2x Kit Makerbot Replicator 2x Kit Makerbot Replicator 2x Kit
Inhalt 1 Stück
195,00 € *
X-Carriage kit for Prusa i3 MK3S X-Carriage kit for Prusa i3 MK3S
Inhalt 1 Stück
9,50 € *
Versandkostenfrei!
Prusa V6 HotEnd Prusa V6 HotEnd Prusa V6 HotEnd
Inhalt 1 Stück
ab 63,00 € *
MasterSpool V4 MasterSpool V4
Inhalt 1 Stück
10,00 € *
Creality Ender 5 - 220*220*300 mm Creality Ender 5 - 220*220*300 mm Creality Ender 5 - 220*220*300 mm
Inhalt 1 Stück
329,00 € *
Versandkostenfrei!
Dual Flexion retrofit kit for dual extruder Dual Flexion retrofit kit for dual extruder Dual Flexion retrofit kit for dual extruder
Inhalt 1 Stück
ab 145,00 € *
V6 Threaded Heatsink V6 Threaded Heatsink V6 Threaded Heatsink
Inhalt 1 Stück
19,50 € *
Nema17 Pancake stepper 25mm Nema17 Pancake stepper 25mm
Inhalt 1 Stück
16,50 € *
Tungsten Carbide Nozzle 0.4mm Tungsten Carbide Nozzle 0.4mm
Inhalt 1 Stück
65,00 € *
Versandkostenfrei!
RemRam V1.5 First Edition RemRam V1.5 First Edition RemRam V1.5 First Edition
Inhalt 1 Stück
89,00 € *
RemRam V1.3 PCB International Buyers only PCB! RemRam V1.3 PCB International Buyers only PCB!
Inhalt 1 Stück
15,00 € *
High Temperature Heater Cartridges High Temperature Heater Cartridges High Temperature Heater Cartridges
Inhalt 1 Stück
68,00 € *
Ø1,75mm PETG Refill 800g 3 Rollen Ø1,75mm PETG Refill 800g 3 Rollen Ø1,75mm PETG Refill 800g 3 Rollen
Inhalt 2.4 Kilogramm (23,75 € * / 1 Kilogramm)
57,00 € *
Versandkostenfrei!
Dual Extrusion+ Dual Extrusion+ Dual Extrusion+
Inhalt 1 Stück
ab 85,00 € *
Versandkostenfrei!
3x Pri-Mat3d PLA 1,75mm 16 Farben 3x Pri-Mat3d PLA 1,75mm 16 Farben
Inhalt 2.4 Kilogramm (20,00 € * / 1 Kilogramm)
48,00 € *
Thermistor 300°C/500°C Thermistor 300°C/500°C Thermistor 300°C/500°C
Inhalt 1 Stück
ab 10,00 € *
Heater Cartridge 12VDC/24VDC Heater Cartridge 12VDC/24VDC Heater Cartridge 12VDC/24VDC
Inhalt 1 Stück
8,00 € *
Bead thermistor 500°C Bead thermistor 500°C
Inhalt 1 Stück
18,00 € *
Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt Radiallüfter 50x15 5015S 24Volt
Inhalt 1 Stück
4,99 € *
sparklab. ICE - wassergekühltes Hotend sparklab. ICE - wassergekühltes Hotend sparklab. ICE - wassergekühltes Hotend
Inhalt 1 Stück
ab 109,00 € *
Druckfeder 4,4x 6,3x 0,9 - 9,3mm lang Druckfeder 4,4x 6,3x 0,9 - 9,3mm lang
Inhalt 1 Stück
0,75 € *
Water Cooling Kit Water Cooling Kit Water Cooling Kit
Inhalt 1 Stück
115,00 € *
Titan Extruder-gespiegelt Titan Extruder-gespiegelt Titan Extruder-gespiegelt
Inhalt 1 Stück
ab 73,00 € *
DyzEnd-X Hotend 1.75mm DyzEnd-X Hotend 1.75mm DyzEnd-X Hotend 1.75mm
Inhalt 1 Stück
ab 98,00 € *
Nozzle kit Nozzle kit
Inhalt 1 Stück
117,00 € *
Individual Nozzles Individual Nozzles
Inhalt 1 Stück
ab 23,00 € *
PT100 Temperature Sensor PT100 Temperature Sensor
19,00 € *
V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit V6 PT100 Total Upgrade Kit
Inhalt 1 Stück
47,00 € *
Volcano Heater Block for PT100/neuer Thermistor Volcano Heater Block for PT100/neuer Thermistor Volcano Heater Block for PT100/neuer Thermistor
Inhalt 1 Stück
24,00 € *
PT100 Amplifier Board PT100 Amplifier Board PT100 Amplifier Board
Inhalt 1 Stück
23,00 € *
Zuletzt angesehen